Sunlu Silk PLA+ filament is designed for 3D printing with a glossy, silky finish, reducing the need for additional polishing after printing. It feeds smoothly and has low warping and shrinkage, helping produce consistent prints. A heated bed is not required, and it is compatible with most FDM 3D printers.

• Material: PLA+
• Color: Blue
• Diameter: 1.75 mm
• Weight: 1 kg
• Quantity: 1 piece
• Packaging: Spool
• Dimensional accuracy: ±0.02 mm
• Density: 1.25 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature: 53 °C
• Melting temperature: 164 °C
• Melt flow rate: 9 g/10 min
• Tensile strength: 60.6 MPa
• Elongation at break: 6.3%
• Flexural strength: 65 MPa
• Elastic modulus: 2760 MPa
• Impact strength: 4.2 kJ/m²
• Compatibility: Most FDM 3D printers, including Bambu Lab, Creality, Prusa, and Anycubic
• Heated bed requirement: Not required