Skroutz.mt

Sherman Mig 360Α Welding Machine MAG / MIG / MMA / TIG with Maximum Welding Current 360A and Duty Cycle 60%
Welding Machines

Sherman Mig 360Α Welding Machine MAG / MIG / MMA / TIG with Maximum Welding Current 360A and Duty Cycle 60%

The synergic welding machine DIGIMIG 360 PULSE is used for manual welding of steel and non-ferrous metals. It allows welding using the MMA (covered electrode), TIG Lift, and MIG/MAG methods. MIG/MAG...

The synergic welding machine DIGIMIG 360 PULSE is used for manual welding of steel and non-ferrous metals. It allows welding using the MMA (covered electrode), TIG Lift, and MIG/MAG methods. MIG/MAG welding can be performed using single and double pulse. The MIG/MAG method can be used in manual and synergic mode, simplifying its operation and allowing the...

See full description See full description

  • Welding Current

    360

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
  • See all
1798 00 €
Delivery by Wed, 05 Aug
53,00 €   shipping cost
Sent from Greece
From Oxytools
Greece
10 pieces
See Tools on the page of Oxytools
Review the product
Product report

Description

Description

The synergic welding machine DIGIMIG 360 PULSE is used for manual welding of steel and non-ferrous metals. It allows welding using the MMA (covered electrode), TIG Lift, and MIG/MAG methods. MIG/MAG welding can be performed using single and double pulse. The MIG/MAG method can be used in manual and synergic mode, simplifying its operation and allowing the welding machine to be used by less experienced users.

Thanks to polarity change, the device allows MIG/MAG welding using both standard wires in shielding gas and self-shielded flux-cored wires.

  • Welding/Cutting: MIG/MAG, MMA DC, lift TIG (with scratching) DC
  • Maximum MMA welding current: 360A
  • Maximum TIG DC welding current: 360A
  • Maximum MIG/MAG welding current: 360A
  • Duty cycle: 60%
  • No-load voltage: 70V
  • Wire feed speed: 1.5 - 24m/min
  • Welding voltage adjustment: -5 - +5
  • Initial current: 40-360A
  • MIG pulse frequency: 0 - 5Hz
  • Maximum MMA power consumption: 15.1kVA
  • Wire spool diameter: 200, 300mm
  • Number of rollers in feeder: 4
  • Main method: MIG/MAG

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MAG, MIG, MMA, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
360 A

Welding Current (max): 360


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Maximum Wire Diameter
20.2 mm

Maximum Wire Diameter: 20.2


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.

Additional Features

Inverter
No
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The synergic welding machine DIGIMIG 360 PULSE is used for manual welding of steel and non-ferrous metals. It allows welding using the MMA (covered electrode), TIG Lift, and MIG/MAG methods. MIG/MAG welding can be performed using single and double pulse. The MIG/MAG method can be used in manual and synergic mode, simplifying its operation and allowing the welding machine to be used by less experienced users.

Thanks to polarity change, the device allows MIG/MAG welding using both standard wires in shielding gas and self-shielded flux-cored wires.

  • Welding/Cutting: MIG/MAG, MMA DC, lift TIG (with scratching) DC
  • Maximum MMA welding current: 360A
  • Maximum TIG DC welding current: 360A
  • Maximum MIG/MAG welding current: 360A
  • Duty cycle: 60%
  • No-load voltage: 70V
  • Wire feed speed: 1.5 - 24m/min
  • Welding voltage adjustment: -5 - +5
  • Initial current: 40-360A
  • MIG pulse frequency: 0 - 5Hz
  • Maximum MMA power consumption: 15.1kVA
  • Wire spool diameter: 200, 300mm
  • Number of rollers in feeder: 4
  • Main method: MIG/MAG

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MAG, MIG, MMA, TIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
360 A

Welding Current (max): 360


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Maximum Wire Diameter
20.2 mm

Maximum Wire Diameter: 20.2


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.

Additional Features

Inverter
No
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.798,00 €
53,00 €   shipping cost