Skroutz.mt

Automatic Suction Pump Jet-100 1hp
Surface Water Pumps

Automatic Suction Pump Jet-100 1hp Code: 01.06.03

The SKM Pumps JET-100 self-priming pump is designed for domestic use and can be used in pressure booster systems, swimming pools, garden watering, and small or large-scale irrigation. It features a...

The SKM Pumps JET-100 self-priming pump is designed for domestic use and can be used in pressure booster systems, swimming pools, garden watering, and small or large-scale irrigation. It features a brass impeller, a stainless steel shaft, and a built-in safety control switch. Its mechanical seal is made of ceramic and graphite.

The pump operates on a...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
  • Voltage Single-Phase
  • See all
161 50 €
Delivery by Mon, 09 Nov
41,00 €   shipping cost
Sent from Greece
From Shopaholic
Greece
1 piece
See Water Pumps on the page of Shopaholic

Learn more about invoicing
Review the product
Product report

Description

Description

The SKM Pumps JET-100 self-priming pump is designed for domestic use and can be used in pressure booster systems, swimming pools, garden watering, and small or large-scale irrigation. It features a brass impeller, a stainless steel shaft, and a built-in safety control switch. Its mechanical seal is made of ceramic and graphite.

The pump operates on a single-phase power supply and has a 1 hp motor. It is fitted with a Pentax capacitor box and Japanese-made NSK bearings, while the maximum water temperature is 90 °C. For protection and greater durability, it should be installed in a place sheltered from the weather. It must not be used to pump chemicals or their residues.

  • Type: Self-priming
  • Power: 1 hp
  • Power supply: Electric, single-phase
  • Port diameter: 1 inch
  • Impeller: Brass
  • Shaft: Stainless steel
  • Mechanical seal: Ceramic and graphite
  • Switch: Built-in safety control
  • Capacitor box: Pentax
  • Bearings: Japanese-made NSK
  • Maximum water temperature: 90 °C

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
01.06.03

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
-
Flow Rate
-

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
-

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
-

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The SKM Pumps JET-100 self-priming pump is designed for domestic use and can be used in pressure booster systems, swimming pools, garden watering, and small or large-scale irrigation. It features a brass impeller, a stainless steel shaft, and a built-in safety control switch. Its mechanical seal is made of ceramic and graphite.

The pump operates on a single-phase power supply and has a 1 hp motor. It is fitted with a Pentax capacitor box and Japanese-made NSK bearings, while the maximum water temperature is 90 °C. For protection and greater durability, it should be installed in a place sheltered from the weather. It must not be used to pump chemicals or their residues.

  • Type: Self-priming
  • Power: 1 hp
  • Power supply: Electric, single-phase
  • Port diameter: 1 inch
  • Impeller: Brass
  • Shaft: Stainless steel
  • Mechanical seal: Ceramic and graphite
  • Switch: Built-in safety control
  • Capacitor box: Pentax
  • Bearings: Japanese-made NSK
  • Maximum water temperature: 90 °C

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
01.06.03

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
-
Flow Rate
-

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
-

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
-

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

161,50 €
41,00 €   shipping cost