Concrete

Neotex Neofloor 25 Kg

Neofloor is a cast self-leveling cementitious mortar for floor smoothing and repairs. It can be used in thicknesses of 1-7mm, providing a smooth final surface.

Applications:

  • Smoothing and leveling of...

Neofloor is a cast self-leveling cementitious mortar for floor smoothing and repairs. It can be used in thicknesses of 1-7mm, providing a smooth final surface.

Applications:

  • Smoothing and leveling of existing indoor floors made of concrete, cement screed, terrazzo, etc., in preparation for the installation of ceramic tiles, natural stone tiles, plastic...
See full description See full description

Description

Description

Neofloor® is a cast self-leveling cementitious mortar for floor smoothing and repairs. It can be used in thicknesses of 1-7mm, providing a smooth final surface.

Applications:

  • Smoothing and leveling of existing indoor floors made of concrete, cement screed, terrazzo, etc., in preparation for the installation of ceramic tiles, natural stone tiles, plastic flooring, natural or synthetic wooden parquet, carpet, etc.
  • Final coating of floors with medium traffic, such as residential storage rooms, lofts, and other auxiliary spaces.

Consumption: 1.7kg/m2/mm

Application Method:

  • The substrate must be clean from dust, free of loose residues, grease, or other contaminants. Cracked floors should be repaired beforehand by sealing the cracks with Neorep® repair mortar.
  • For better adhesion, it is recommended to add 1 part Revinex® emulsion to 3 parts water in Neofloor® (6kg liquid mixture / 25kg Neofloor®).
  • Mix 25kg of material with 3.7-3.9kg of water, adding the material into the water, until a homogeneous, lump-free mass is formed.
  • The mixture remains workable for 30 minutes.
  • For distributing the material, use a rubber squeegee or a large-area spatula.
  • Air bubble release can be achieved with a spiked roller.
  • For thickness greater than 7mm, sand can be added at a ratio of up to 30%.
  • The fresh material should be protected from sun, frost, or strong air currents until it hardens.

Special Recommendations:

  • Low temperatures and humidity extend the setting time of the mortar.
  • Floors with permanent moisture must be waterproofed before using Neofloor®.
  • The addition of 1.5kg Revinex® facilitates the leveling of the mortar.
  • The material cannot be applied on metal or wooden surfaces.

Packaging: 25kg bags

Storage Conditions: 12 months from the date of production, in dry and cool conditions, protected from direct sunlight.

Tool Cleaning: Clean all tools with water immediately after use.

Precautionary Instructions: Keep away from children. Use protective equipment or gloves.

Auxiliary Materials:

  • Neorep®: 25kg bags

Manufacturer

See full description

Specifications

Specifications

Type
Cement mortar
Weight
25 kg
Pressed Cement Mortar
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Neofloor® is a cast self-leveling cementitious mortar for floor smoothing and repairs. It can be used in thicknesses of 1-7mm, providing a smooth final surface.

Applications:

  • Smoothing and leveling of existing indoor floors made of concrete, cement screed, terrazzo, etc., in preparation for the installation of ceramic tiles, natural stone tiles, plastic flooring, natural or synthetic wooden parquet, carpet, etc.
  • Final coating of floors with medium traffic, such as residential storage rooms, lofts, and other auxiliary spaces.

Consumption: 1.7kg/m2/mm

Application Method:

  • The substrate must be clean from dust, free of loose residues, grease, or other contaminants. Cracked floors should be repaired beforehand by sealing the cracks with Neorep® repair mortar.
  • For better adhesion, it is recommended to add 1 part Revinex® emulsion to 3 parts water in Neofloor® (6kg liquid mixture / 25kg Neofloor®).
  • Mix 25kg of material with 3.7-3.9kg of water, adding the material into the water, until a homogeneous, lump-free mass is formed.
  • The mixture remains workable for 30 minutes.
  • For distributing the material, use a rubber squeegee or a large-area spatula.
  • Air bubble release can be achieved with a spiked roller.
  • For thickness greater than 7mm, sand can be added at a ratio of up to 30%.
  • The fresh material should be protected from sun, frost, or strong air currents until it hardens.

Special Recommendations:

  • Low temperatures and humidity extend the setting time of the mortar.
  • Floors with permanent moisture must be waterproofed before using Neofloor®.
  • The addition of 1.5kg Revinex® facilitates the leveling of the mortar.
  • The material cannot be applied on metal or wooden surfaces.

Packaging: 25kg bags

Storage Conditions: 12 months from the date of production, in dry and cool conditions, protected from direct sunlight.

Tool Cleaning: Clean all tools with water immediately after use.

Precautionary Instructions: Keep away from children. Use protective equipment or gloves.

Auxiliary Materials:

  • Neorep®: 25kg bags

Manufacturer

Type
Cement mortar
Weight
25 kg
Pressed Cement Mortar
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

23,25 €
74,00 €   shipping cost