Skroutz.mt

Bastian RWF Baby Car Seat i-Size with Isofix Red Burgudy 0-36 kg
Baby Car Seats

Bastian RWF Baby Car Seat i-Size with Isofix Red Burgudy 0-36 kg

The Lionelo Bastian RWF child car seat is installed rear-facing for children measuring 40–105 cm and forward-facing for children measuring 100–150 cm. The EasyTurn 360° rotating base makes it easier...

The Lionelo Bastian RWF child car seat is installed rear-facing for children measuring 40–105 cm and forward-facing for children measuring 100–150 cm. The EasyTurn 360° rotating base makes it easier to place your child in the seat and take them out, while the Top Tether strap is positioned so it does not obstruct rotation. The seat features a Tri-Guard...

See full description See full description

Top specs

  • Orientation

    This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

    Forward

    The forward-facing seat is usually recommended for children over 2 years old or even earlier depending on the weight of the baby. 2. Forward-facing seats may be booster seats or may not have a belt as the car's belt is used.

    Rear

    The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
  • Suitable for Weight 0-36 kg
  • Suitable for Height 40-150 cm

  • Number of Harness Attachment Points

    Shows how many points the car seat belt fastens.
  • Seat Weight 12 kg
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The Lionelo Bastian RWF child car seat is installed rear-facing for children measuring 40–105 cm and forward-facing for children measuring 100–150 cm. The EasyTurn 360° rotating base makes it easier to place your child in the seat and take them out, while the Top Tether strap is positioned so it does not obstruct rotation. The seat features a Tri-Guard headrest with EPS and Memory Foam, side-impact protection with reinforced EPS side panels, and magnetic belt holders.

It is secured using ISOFIX and Top Tether, and the installation indicators turn green when it is fitted correctly. The backrest reclines to four positions in both directions. The Dri-Seat ventilated reducer inserts make the seat shallower for smaller children, while the anti-rotation frame provides more legroom when rear-facing. The model complies with the ECE R129/03 standard and has undergone crash testing at TASS International.

  • Child height range: 40–150 cm
  • Weight group: 0–36 kg
  • Maximum child age: 12 years
  • Orientation: Rear-facing and forward-facing
  • Rear-facing orientation: For heights of 40–105 cm
  • Forward-facing orientation: For heights of 100–150 cm
  • Installation: ISOFIX and Top Tether
  • Seat harness: 5-point
  • Harness height adjustment: Integrated into the headrest
  • Recline: 4 positions rear-facing and forward-facing
  • Rotation: 360°
  • Side-impact protection: With reinforced EPS side panels
  • Headrest: Tri-Guard technology with EPS and Memory Foam
  • Reducer inserts: With Dri-Seat ventilation system
  • Belt holders: Magnetic
  • Standard: ECE R129/03
  • Seat weight: 12 kg
  • Dimensions: 54 × 45 × 62 cm
  • Colour: Red

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

General Information

Facing
Forward, Rear

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Forward

The forward-facing seat is usually recommended for children over 2 years old or even earlier depending on the weight of the baby. 2. Forward-facing seats may be booster seats or may not have a belt as the car's belt is used.

Rear

The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
Number of Belt Anchor Points
5

Number of Belt Anchor Points

Shows how many points the car seat belt fastens.
Seat Weight
12 kg
Colour
Red

Age group

Weight Group
0-36 kg
Maximum Child Age
12 years
Child Height
40-150 cm

Details

Manufacturer Colour
Red Burgudy
Recline
Yes

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
Yes

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
Yes

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
No
with Base
Yes

Technical Specifications

ADAC Test
Not Available

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.
Swedish Plus Test
No

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
Yes

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
Yes

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.

Installation

ISOfix
Yes

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
Yes

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Lionelo Bastian RWF child car seat is installed rear-facing for children measuring 40–105 cm and forward-facing for children measuring 100–150 cm. The EasyTurn 360° rotating base makes it easier to place your child in the seat and take them out, while the Top Tether strap is positioned so it does not obstruct rotation. The seat features a Tri-Guard headrest with EPS and Memory Foam, side-impact protection with reinforced EPS side panels, and magnetic belt holders.

It is secured using ISOFIX and Top Tether, and the installation indicators turn green when it is fitted correctly. The backrest reclines to four positions in both directions. The Dri-Seat ventilated reducer inserts make the seat shallower for smaller children, while the anti-rotation frame provides more legroom when rear-facing. The model complies with the ECE R129/03 standard and has undergone crash testing at TASS International.

  • Child height range: 40–150 cm
  • Weight group: 0–36 kg
  • Maximum child age: 12 years
  • Orientation: Rear-facing and forward-facing
  • Rear-facing orientation: For heights of 40–105 cm
  • Forward-facing orientation: For heights of 100–150 cm
  • Installation: ISOFIX and Top Tether
  • Seat harness: 5-point
  • Harness height adjustment: Integrated into the headrest
  • Recline: 4 positions rear-facing and forward-facing
  • Rotation: 360°
  • Side-impact protection: With reinforced EPS side panels
  • Headrest: Tri-Guard technology with EPS and Memory Foam
  • Reducer inserts: With Dri-Seat ventilation system
  • Belt holders: Magnetic
  • Standard: ECE R129/03
  • Seat weight: 12 kg
  • Dimensions: 54 × 45 × 62 cm
  • Colour: Red

Manufacturer

Manufacturer Details

Warnings & Safety Information

General Information

Facing
Forward, Rear

Facing

This concerns the direction that the seat is facing. It can be either forward or backward. Additionally, some seats have the ability to rotate and have both directions.

Forward

The forward-facing seat is usually recommended for children over 2 years old or even earlier depending on the weight of the baby. 2. Forward-facing seats may be booster seats or may not have a belt as the car's belt is used.

Rear

The baby's first car seat should be strictly rear-facing. 2. Until the age of 2 or until the child exceeds the maximum weight allowed for the seat, the baby should face backwards, as the seat serves the correct posture that protects and supports the head, neck, and spine in the event of a collision.
Number of Belt Anchor Points
5

Number of Belt Anchor Points

Shows how many points the car seat belt fastens.
Seat Weight
12 kg
Colour
Red

Age group

Weight Group
0-36 kg
Maximum Child Age
12 years
Child Height
40-150 cm

Details

Manufacturer Colour
Red Burgudy
Recline
Yes

Recline

The seat is properly adjusted to have a tilt. The recline helps prevent the child's head from leaning forward when sleeping.

Some models allow for adjustment of the recline when the child is already seated, while others require adjustment before placing the child in the seat.

It is not recommended for newborns as babies should not be lifted more than 30 degrees due to the potential risk of musculoskeletal problems.
Swivel
Yes

Swivel

The seat has the ability to make a full rotation (360 degrees) for a change of orientation and immediate access to the child.

2. The rotation capability offers comfort and flexibility to the parent as they have easy access to any orientation the seat has.
Top Tether
Yes

Top Tether

It is an additional restraint strap located on the top or back of the seat, which holds it in place and reduces forward movement of the seat during a frontal collision, providing additional safety in case of an accident.
With Removable Covers
No
with Base
Yes

Technical Specifications

ADAC Test
Not Available

ADAC Test

ADAC is a company that conducts crash tests and evaluates car seats for safety, ergonomics, functionality, and the presence of harmful substances.
Swedish Plus Test
No

Swedish Plus Test

Considered the strictest crash test worldwide. It focuses on measuring the pressure exerted on the neck, imposing limits that only rear-facing seats can meet.
i-Size
Yes

i-Size

These are new generation seats that offer additional safety in case of side collision.


i-Size seats are designed according to the height, not the weight of the child, allowing them to travel rear-facing for a longer period of time.


i-Size seats do not replace weight-based car seats but offer an additional option. They are recommended for both newborns and older children.
Side Collision Protection
Yes

Side Collision Protection

An integrated system on the side of the seat that reduces the impact force of a side collision, protecting the child from serious injury.

Installation

ISOfix
Yes

ISOfix

It is a system for safely installing a child seat. To apply it, it is necessary for the rear seats of the car to have the corresponding metal receptacles, but all modern cars have them.

2. The isofix system is easier to install compared to seats that do not have it. The seat clicks into the car's receptacles and thus reduces the movement of the seat towards the front in the event of a collision.

3. Most seats that apply to all ages have the isofix system.
Seatbelt
Yes

Seatbelt

The car seat can be installed in the car using the vehicle's seat belt.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

269,99 €
80,00 €   shipping cost
Lionelo