Cementitious ceramic tile adhesive, white, with low slip, high bonding strength, and moisture resistance. It quickly develops mechanical strength and is suitable for wall and floor coverings, both indoors and outdoors. Classified as C1 according to EN 12004.

• Consumption: 3-5kg/m²
• Packaging: 25kg
• Color: White

Properties: Provides high initial and final bonding strength and is resistant to moisture.

Applications: Suitable for tile coverings on walls and floors, indoors and outdoors. Adding DUROSTICK acrylic emulsion to the mixing water in a 1:1 ratio further improves its characteristics, making it also suitable for low-absorption tiles.

Instructions for Use:

1. Surface preparation: The surface must be hard, clean, and dampened. Priming with acrylic emulsion or DUROSTICK D-20 in the appropriate ratio is required, depending on the surface.
2. Application: Mix 25kg of mortar with 6.0-6.5lt of water to create a homogeneous mass. Spread the adhesive with a notched trowel and place the tiles in the desired position.

Cleaning: Tools are cleaned with water immediately after use.

Storage: Keep sealed in dry and shaded areas for 12 months from the production date.