The GR SW400 Eco Kit mechanism set automates a double-leaf swing garage door with two linear electromechanical motors permanently lubricated with grease. Each motor moves a door leaf weighing up to 250 kg and up to 4 m wide. An electric lock is required for door leaves wider than 2.5 m. The mechanism opens the door up to 120° and supports up to 20 opening and closing cycles per hour at 20 °C.

The control unit is housed in a sealed plastic box and supports automatic closing, motor force adjustment, and connections for an electric lock, warning light, and safety photocells. In the event of a power outage, the motors can be disengaged with a key for manual operation.

• Door type: Double-leaf swing
• Mechanism type: Linear, electromechanical, non-reversible, permanently lubricated with grease
• Motors: 2
• Motor power: 330 W each
• Supply and operating voltage: 230 Vac, single-phase
• Supply current: 0.9 A
• Capacitor capacity: 8 μF
• Maximum weight per door leaf: 250 kg
• Maximum width per door leaf: 4 m
• Maximum width without an electric lock: 2.5 m per door leaf
• Maximum opening angle: 120°
• Usable piston stroke: 40 cm
• Opening and closing cycles per hour: Up to 20 at 20 °C
• Maximum duty cycle: 35% - S3
• Maximum force: 2,200 N
• Motor speed: 1,400 rpm
• Maximum linear speed: 0.018 m/sec
• Opening and closing time: 33 sec
• Operating temperature: From -25 °C to 60 °C
• Motor winding thermal protection: 150 °C
• Thermal reset time: 5 min
• Dust and moisture protection rating: IP43
• Housing material: Aluminum
• Housing color: Black
• Control unit: 1 in a sealed plastic box with cable glands
• Remote control: 1 wireless
• Remote control frequency: 433.92 MHz
• Remote control coding: Fixed 12-bit code, Autotech 24-bit, or KeeLoq rolling code
• Remote control buttons: 3
• Remote control range: Approximately 50 m
• Maximum number of remote controls that can be registered: 250
• Installation accessories: Mounting brackets and pins for the motors
• Disengagement method: Key-operated
• Control unit features: Automatic closing, torque or force adjustment, soft stop, LED diagnostics, and SMD technology
• Control unit connections: Electric lock, 230 Vac or 24 Vdc warning light, 230 Vac lamp, and internal or external safety photocells
• Photocell operation: Active during closing, with the option to reverse movement to opening
• Learning modes: Easy and Normal
• Remote control registration and deletion: Push-button
• CE compliance: Motors and control board
• Manufacturers: GR SISTEMI for the motors and AUTOTECH for the control board
• Package contents: 2 motors, control unit, remote control, mounting brackets and pins, 2 x 8 μF capacitors, 2 disengagement keys, and installation instructions in Greek