Vitex Vito concrete paint is a water-based acrylic paint for exterior use, suitable for painting and protecting cement surfaces. Its alkali resistance makes it suitable for these surfaces, while it spreads easily and forms a smooth, matt finish.
Apply two coats using a roller, brush or airless spray gun, thinning with up to 10% water. The surface must be clean, dry and smooth. Touch-dry in 30–60 minutes and recoat after 3–4 hours; drying times may vary depending on temperature and humidity. Do not apply at temperatures below 5 °C or above 35 °C, at relative humidity above 70%, or when rain or frost is expected within the next 48 hours. Painted surfaces can be washed after at least three weeks. Clean tools immediately after use with water and, if necessary, soap or detergent.
- Type: Acrylic concrete paint
- Use: Exterior
- Colour: Grey
- Finish: Matt
- Volume: 750 ml
- Thinning: Up to 10% with water
- Coats: 2
- Application tools: Roller, brush or airless spray gun
- Touch-dry: 30–60 minutes
- Recoating: After 3–4 hours
- Application temperature: From 5 °C to 35 °C
- Maximum relative humidity for application: 70%
- Tool cleaning: Immediately after use with water and, if necessary, soap or detergent
Specifications
- Type
- Concrete Paint
- Colour
- Grey
- Acrilyc
- Yes
- Luminosity
- Matt
Quantity
- Volume
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.