Skroutz.mt

Electric Surface Water Pump Centrifugal with Automatic Suction 1500W Single-Phase
Surface Water Pumps

Electric Surface Water Pump Centrifugal with Automatic Suction 1500W Single-Phase Code: GF0712

The GF0712 surface centrifugal pump pumps clean water, even with air bubbles, and non-corrosive liquids. Its self-priming capacity reaches a depth of up to 9 m. It is used to transfer water from...

The GF0712 surface centrifugal pump pumps clean water, even with air bubbles, and non-corrosive liquids. Its self-priming capacity reaches a depth of up to 9 m. It is used to transfer water from wells, tanks, lakes and shafts, as well as for irrigation and water supply in domestic and gardening applications. It can also be used as a pressure boosting system...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.

  • Centrifugal

    Pumps with impellers that enhance water flow.
  • Voltage Single-Phase

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The GF0712 surface centrifugal pump pumps clean water, even with air bubbles, and non-corrosive liquids. Its self-priming capacity reaches a depth of up to 9 m. It is used to transfer water from wells, tanks, lakes and shafts, as well as for irrigation and water supply in domestic and gardening applications. It can also be used as a pressure boosting system by connecting an expansion tank.

The shaft is made of stainless steel and the housing of cast iron. The water temperature must not exceed 35 °C, and the ambient temperature must not exceed 40 °C.

  • Power supply: Electric
  • Power: 1500 W
  • Pump type: Surface-mounted, centrifugal, self-priming
  • Installation: Horizontal
  • Voltage: Single-phase, 230 V
  • Frequency: 50 Hz
  • Maximum flow rate: 60 l/min
  • Suction depth: 9 m
  • Pumping head: 45 m
  • Pressure head: 10 m
  • Pressure: 1 bar
  • Connection diameter: 1"
  • Protection rating: IPX4, IP 44
  • Insulation class: B
  • Protection class: Class 2, requires grounding
  • Shaft material: Stainless steel
  • Housing material: Cast iron
  • Impeller blade material: PPO
  • Power cable length: 1 m
  • Dimensions: 48 × 20 × 21 cm
  • Net weight: 12.95 kg
  • Maximum rotation speed: 2850 rpm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
GF0712

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Power
1500 W
Manometric Head
10 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
1 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The GF0712 surface centrifugal pump pumps clean water, even with air bubbles, and non-corrosive liquids. Its self-priming capacity reaches a depth of up to 9 m. It is used to transfer water from wells, tanks, lakes and shafts, as well as for irrigation and water supply in domestic and gardening applications. It can also be used as a pressure boosting system by connecting an expansion tank.

The shaft is made of stainless steel and the housing of cast iron. The water temperature must not exceed 35 °C, and the ambient temperature must not exceed 40 °C.

  • Power supply: Electric
  • Power: 1500 W
  • Pump type: Surface-mounted, centrifugal, self-priming
  • Installation: Horizontal
  • Voltage: Single-phase, 230 V
  • Frequency: 50 Hz
  • Maximum flow rate: 60 l/min
  • Suction depth: 9 m
  • Pumping head: 45 m
  • Pressure head: 10 m
  • Pressure: 1 bar
  • Connection diameter: 1"
  • Protection rating: IPX4, IP 44
  • Insulation class: B
  • Protection class: Class 2, requires grounding
  • Shaft material: Stainless steel
  • Housing material: Cast iron
  • Impeller blade material: PPO
  • Power cable length: 1 m
  • Dimensions: 48 × 20 × 21 cm
  • Net weight: 12.95 kg
  • Maximum rotation speed: 2850 rpm

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
GF0712

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Power
1500 W
Manometric Head
10 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
1 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.