Water Softeners

Pentair Water Softener 1" Code: 255/740

The Pentair 255/740 water softener combines the Autotrol 255 valve with the Logix 740 electronic timer. The timer can be programmed to regenerate on specific days of the week or at intervals of a set...

The Pentair 255/740 water softener combines the Autotrol 255 valve with the Logix 740 electronic timer. The timer can be programmed to regenerate on specific days of the week or at intervals of a set number of days, with fully programmable cycles. The Duraflow sealing system uses a frictionless flapper and valve discs to control flow, and hard water does not...

See Description & Specifications See Description & Specifications

Learn more about invoicing

Description & Specifications

The Pentair 255/740 water softener combines the Autotrol 255 valve with the Logix 740 electronic timer. The timer can be programmed to regenerate on specific days of the week or at intervals of a set number of days, with fully programmable cycles. The Duraflow sealing system uses a frictionless flapper and valve discs to control flow, and hard water does not bypass the resin during regeneration.

The valve body is made of glass-filled thermoplastic and can function as either a water softener or a filter. The controller records usage data for operational monitoring.

  • Control type: Electronic timer
  • Series: Logix 700
  • Port size: 1"
  • Water flow rate: 3.52 m³/h at a pressure drop of 1.03 bar
  • Regeneration programming: By day of the week or at intervals of 1/2 to 99 days
  • Cycle programming: Fully programmable cycle times
  • Salt setting: In 10 g increments
  • Operating history: H0–H13 usage data
  • Body material: Glass-filled thermoplastic
  • Sealing system: Duraflow with frictionless flapper
  • Certifications: NSF Listed, NSF/ANSI 44, WQA Gold Seal, CE, ACS
  • Weight with controller: 1.8 kg
  • Operating pressure: 1.38–8.27 bar
  • Test pressure: 20.69 bar
  • Water temperature: 2–38 °C
  • Ambient temperature: 2–48.9 °C
  • Controller operating voltage: 12 VAC
  • Power consumption: Approx. 3 W
  • Motor voltage: 12 VAC
  • Supply frequency: 50 or 60 Hz
  • Transformer output voltage: 12 VAC / 150 mA
  • Transformer input voltage: 230 VAC
  • Tank thread: 2½"–8, male
  • Brine connection: ¼" or ⅜" NPT
  • Inlet/outlet: 1" BSPT, female
  • Alternative connections: ¾" or ½" BSPT
  • Distributor tube: 27 mm or 20.6 mm
  • Drain connection: ½"

Manufacturer

Product Number
255/740
Laundry
No
Spare Part
No
Section
1 "

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

540,00 €
14,00 €   shipping cost