Skroutz.mt

Hojita HJWPFW031 Pump Waste Water / Sewage 1hp 601034.0000
Submersible Water Pumps

Hojita HJWPFW031 Pump Waste Water / Sewage 1hp 601034.0000

Submersible Dirty Water Pump 750W

The Hojita HJWPFW031 submersible dirty water pump is designed for the efficient pumping of water containing solid particles, such as sewage sludge, dirty water, and...

Submersible Dirty Water Pump 750W

The Hojita HJWPFW031 submersible dirty water pump is designed for the efficient pumping of water containing solid particles, such as sewage sludge, dirty water, and rainwater. With a power of 750W and robust construction, it ensures reliable operation under demanding conditions, ideal for domestic, agricultural, or light...

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    8

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Submersible Dirty Water Pump 750W

The Hojita HJWPFW031 submersible dirty water pump is designed for the efficient pumping of water containing solid particles, such as sewage sludge, dirty water, and rainwater. With a power of 750W and robust construction, it ensures reliable operation under demanding conditions, ideal for domestic, agricultural, or light industrial use.

Main advantages:
  • Powerful performance with a 750W motor for fast pumping.
  • Resistance to solids and impurities up to 35 mm in size.
  • Submersible design for operation in liquids without risk of damage.
  • Durable body made of stainless steel and high-strength plastic.
  • Built-in thermal protector to prevent overheating.
  • Easy installation and maintenance.
Technical specifications:
  • Voltage: 220V-240V~50Hz.
  • Power: 750W (1.0HP).
  • Maximum head: 8m.
  • Maximum flow: 217L/min.
  • Maximum depth: 7m.
  • Maximum particle diameter: 35mm.
  • Pipe diameter: 1.
    Copper motor.
  • Cable length: 9m.
  • With automatic operation switch.
  • Weight: 5.17Kg.
Package contents:
  • 1x Hojita HJWPFW031 submersible dirty water pump.
  • 1x Power cable (fixed length).
  • 1x User and installation manual.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
8 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
8 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Submersible Dirty Water Pump 750W

The Hojita HJWPFW031 submersible dirty water pump is designed for the efficient pumping of water containing solid particles, such as sewage sludge, dirty water, and rainwater. With a power of 750W and robust construction, it ensures reliable operation under demanding conditions, ideal for domestic, agricultural, or light industrial use.

Main advantages:
  • Powerful performance with a 750W motor for fast pumping.
  • Resistance to solids and impurities up to 35 mm in size.
  • Submersible design for operation in liquids without risk of damage.
  • Durable body made of stainless steel and high-strength plastic.
  • Built-in thermal protector to prevent overheating.
  • Easy installation and maintenance.
Technical specifications:
  • Voltage: 220V-240V~50Hz.
  • Power: 750W (1.0HP).
  • Maximum head: 8m.
  • Maximum flow: 217L/min.
  • Maximum depth: 7m.
  • Maximum particle diameter: 35mm.
  • Pipe diameter: 1.
    Copper motor.
  • Cable length: 9m.
  • With automatic operation switch.
  • Weight: 5.17Kg.
Package contents:
  • 1x Hojita HJWPFW031 submersible dirty water pump.
  • 1x Power cable (fixed length).
  • 1x User and installation manual.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
8 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
8 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.