Phase Relays

Shelly Qubino Wave Pro 3 Z-wave 3 Channel Din Rail Relay Wavepro3

The Shelly Qubino Wave Pro 3 DIN-rail relay controls and automates three independent electrical circuits via Z-Wave. Its potential-free contacts support resistive, capacitive and inductive loads,...

The Shelly Qubino Wave Pro 3 DIN-rail relay controls and automates three independent electrical circuits via Z-Wave. Its potential-free contacts support resistive, capacitive and inductive loads, while overtemperature protection switches off the relay when the temperature exceeds 80°C. Add it to the network using SmartStart by scanning the QR code.

It...

See Description & Specifications See Description & Specifications
164 90 €
Delivery Tue, 24 Nov - Mon, 30 Nov
14,00 €   shipping cost
Sent from Greece
From Getters 4.5 (117)

Learn more about invoicing

Description & Specifications

The Shelly Qubino Wave Pro 3 DIN-rail relay controls and automates three independent electrical circuits via Z-Wave. Its potential-free contacts support resistive, capacitive and inductive loads, while overtemperature protection switches off the relay when the temperature exceeds 80°C. Add it to the network using SmartStart by scanning the QR code.

It supports the Z-Wave Mesh network, in which it also operates as a repeater, as well as Z-Wave Long Range. Compatibility with certified Z-Wave gateways enables remote control, scheduling and scene creation. It supports the S2, S2 Authenticated and S0 security standards, as well as OTA updates.

  • Type: 3-channel power relay
  • Mounting: DIN rail
  • Connectivity: Z-Wave, Z-Wave Long Range
  • Outputs: 3 independent
  • Supply voltage: 110–240 V AC, 50/60 Hz
  • Maximum switching voltage: 240 V AC, 30 V DC
  • Maximum switching current: 16 A per channel and 48 A total in AC and DC
  • Power consumption: Less than 0.3 W
  • Supported loads: Resistive, capacitive and inductive
  • Overtemperature protection: Switches off above 80°C
  • Z-Wave Long Range range: Up to 80 m indoors and up to 1000 m outdoors
  • Z-Wave Long Range frequency: 864.0 MHz
  • Z-Wave Mesh range: Up to 40 m indoors
  • Z-Wave Mesh frequency: 868.4 MHz
  • Z-Wave Mesh repeater: Yes
  • Z-Wave processor: S800
  • RF transmitter power: Less than 25 mW
  • Security standards: S2, S2 Authenticated, S0
  • Updates: OTA
  • Dimensions: 96 × 53 × 59 ± 0.5 mm
  • Weight: 150 g
  • Terminal torque: 0.4 Nm
  • Wire cross-section: 0.5–2.5 mm² (20–14 AWG, green terminal)
  • Wire stripping length: 6–7 mm
  • Enclosure material: Plastic
  • Colour: Black
  • Operating temperature: -20°C to 40°C
  • Operating humidity: 30–70% RH
  • Maximum installation altitude: 2000 m above sea level

Manufacturer

Specifications

Type
Power
Voltage
240 V
Nominal Voltage
16 A
with Energy Consumption Meter
No
with Timer
No
Type of Residual Current Relay
Type F

Smart Features

Connectivity
Z-Wave
Smart Ecosystem
Shelly

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

164,90 €
14,00 €   shipping cost