Creality Hyper PLA-CF 3D printing filament contains carbon fibers and has 30% higher flexural strength, flexural modulus, and impact strength than PLA. Its low shrinkage and warp resistance help ensure precise fit between printed parts. It is designed to be self-supporting, making supports easier to remove and leaving a smooth surface where they were attached.
It prints smoothly at high speeds without clogging and is suitable for structural parts in applications such as drones, aircraft models, joints, and motors. It is compatible with Creality open-frame and enclosed 3D printers, as well as most printers on the market. Drying before use is optional but recommended: 55 °C for 8 hours in a fan-assisted drying box or 75 °C for 12 hours on the printer’s heated bed.
- Material: PLA-CF
- Color: Purple
- Diameter: 1.75 mm
- Weight: 1 kg
- Packaging format: Spool
- Quantity: 1 piece
- Density: 1.21 g/cm³ at 21.5 °C
- Heat deflection temperature: 62 °C
- Tensile strength (X-Y): 52.99 MPa
- Tensile modulus (X-Y): 1146.06 MPa
- Elongation at break (X-Y): 6.3%
- Flexural strength (X-Y): 92.38 MPa
- Flexural modulus (X-Y): 2490.17 MPa
- Impact strength (X-Y): 8.83 kJ/m²
- Drying conditions: 55 °C for 8 hours in a fan-assisted drying box or 75 °C for 12 hours on the printer’s heated bed
- Product Number
- 3301060018
- Material
- PLA-CF
- Colour
- Purple
- Diameter
- 1.75 mm
- Weight
- 1 kg
- Filament Packaging
- Spool
- Quantity
- 1 pcs
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.