The Schneider Electric A9A26906 single panel indicator signals locally and remotely when the connected device trips in the event of a fault. It has one changeover contact and clips onto a DIN rail.
The screw terminals are located at the top. The indicator is designed for installations in small commercial premises or buildings.
- Contact type: One changeover contact
- Rated AC current: 0.1–6 A at 240 V and 0.1–3 A at 415 V
- Rated DC current: 0.1–6 A at 24 V, 0.1–2 A at 48 V, 0.1–1.5 A at 60 V, and 0.1–1 A at 130 V
- Operating frequency: 50–60 Hz
- Rated insulation voltage Ui: 500 V
- Rated impulse withstand voltage Uimp: 4 kV
- Width: 9 mm
- Dimensions: 9 × 86 × 73 mm
- Colour: White (RAL 9003)
- Terminals: Screw terminals, located at the top
- Rigid cable connection: 1 × 1–4 mm² or 2 × 2.5 mm²
- Flexible cable connection: 1 × 0.5–2.5 mm² or 2 × 1.5 mm²
- Stripping length: 10 mm
- Tightening torque: 1 N·m
- Screwdriver: PZ1
- Protection rating: IP20
- Pollution degree: 3
- Tropicalisation level: 2
- Operating temperature: −35°C to +70°C
- Storage temperature: −40°C to +85°C
- Standards: EN/IEC 60947-5-1, GB/T 14048.5
- Certifications: CE, UKCA
- Product Number
- A9A26906
- Colour
- White
- Number of Indicator Lights
- Single
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.