The Mercusys MS110CMP v1 switch connects network devices through eight 10/100 Mbps PoE+ ports and two Gigabit ports. The PoE+ ports transmit data and power over the same cable, providing up to 30 W per port and a total budget of 115 W for compatible devices such as IP cameras, access points, and IP phones. Extend Mode enables PoE transmission over distances of up to 250 m, while Isolation Mode isolates traffic on ports 1–8. PoE Auto Recovery automatically reboots a PoE device if it stops responding.
The metal enclosure helps dissipate heat, and the switch can be placed on a desk or mounted on a wall. It supports Plug & Play, auto-negotiation, and Auto MDI/MDIX.
- Version: v1
- Layer: 2
- Ethernet ports: 10 RJ45 ports, including 8 PoE+ 10/100 Mbps ports and 2 Gigabit 10/100/1000 Mbps ports without PoE
- Standards: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
- PoE+ power: Up to 30 W per port, 115 W total
- Uplink ports: 2 when Isolation Mode is enabled, for connecting to the internet and an NVR
- Extend Mode: PoE transmission up to 250 m on ports 1–4 and 5–8
- Isolation Mode: Isolates traffic on ports 1–8
- PoE Auto Recovery: Automatically reboots unresponsive PoE devices
- Port functions: Auto-Negotiation and Auto MDI/MDIX
- Additional features: Plug & Play, IEEE 802.3x Flow Control, automatic MAC address learning and aging
- Transmission method: Store-and-forward
- Data rates: 10/100 Mbps in half duplex, 20/200 Mbps in full duplex
- Switching capacity: 5.6 Gbps
- Jumbo Frame: 2 KB
- MAC address table: 2K
- Cabling: 10BASE-T with two-pair CAT 3 or higher UTP/STP cable up to 100 m; 100BASE-TX with two-pair CAT 5e or higher UTP/STP cable up to 100 m; 1000BASE-T with four-pair CAT 5e or higher UTP/STP cable up to 100 m
- LED indicators: Link and activity, PoE status for each Ethernet port, PoE Max, and power
- Enclosure: Metal
- Mounting: Desktop or wall mount, with rack-mounting capability
- Dimensions: 171 × 98 × 27 mm
- External power adapter: Input: 100–240 V AC, 50/60 Hz; output: 54 V / 2.2 A
- Maximum power consumption: 3.79 W with no PD device connected and 130.49 W with a 115 W PD device connected, at 220 V / 50 Hz
- Maximum heat dissipation: 12.92 BTU/h with no PD device connected and 444.97 BTU/h with a 115 W PD device connected
- Operating temperature: -10 to 40 °C
- Storage temperature: -40 to 70 °C
- Operating humidity: 10% to 90%, non-condensing
- Storage humidity: 5% to 95%, non-condensing
- Certifications: CE, RoHS
- Package contents: Switch, power adapter, and installation guide
Network Specifications
- Layer
- L2
- PoE
- Yes
- PoE Version
- 802.3at
Technical Specifications
- Ethernet connections
- 8 Port
- Ethernet Speed
- 1000 Mbps
- Rack mounting
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.