The Mission Air MA ICE-20 heating cable is designed to prevent ice from forming outdoors, such as on pavements, driveways and parking areas, and to protect pipes, gutters and roof edges. It is a constant-resistance cable with a linear output of 20 W/m and a single-sided power supply. When used with a suitable thermostat, it can operate according to the set activation temperature.
It can be installed in a concrete screed, in layers of asphalt, or in a base layer beneath paving blocks and stone slabs. It must not be shortened or cut, nor come into contact with or overlap itself. The minimum installation temperature is 5 °C.
- Type: Constant-resistance heating cable
- Linear output: 20 W/m
- Total output: 150 W
- Cable length: 7.5 m
- Power supply: Single-sided
- Supply voltage: 230 V
- Cable diameter: 6–6.5 mm
- Maximum rated temperature: Up to 105 °C
- Power cable length: 3 m
- Minimum installation temperature: 5 °C
- Applications: Pavements, driveways, parking areas, pipes, roof edges and gutters
Dimensions
- Type
- -
- Compatibility
- -
- Construction Material [Pharmaceutical]
- -
- Smart / WiFi
- No
Technical Parameters
- Thread / Cross-section
- -
- Power
- 20 W
- Maximum Pressure
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.