The No Frost Heating Cable protects pipes, gutters, valves, meters and drainage chambers from frost. The built-in thermostat switches the cable on when the temperature falls below +3 °C and off when it rises above +15 °C. It can also be used to maintain the temperature of liquids in tanks and pipes, and to protect roof edges from the accumulation of snow and ice.
The kit includes a single-end-powered heating cable, a power cord with a waterproof plug and an automatic thermostat. It can be installed on steel, copper or plastic pipes, provided the material is certified for use at temperatures up to +90 °C. After installation, the protected section should be covered with thermal insulation.
- Heating cable length: 40 m
- Power cord length: 2 m
- Output per metre: 16 W/m
- Total output: 640 W
- Power supply: 230 V
- Cable diameter: 8 mm
- Heating element: Stranded wire
- Thermostat: Built-in, switches on below +3 °C and off above +15 °C
- Protection rating: IPX8
- Installation: Under thermal insulation
Dimensions
- Type
- Thermostat
- Compatibility
- -
- Construction Material [Pharmaceutical]
- Inox
- Smart / WiFi
- No
Technical Parameters
- Thread / Cross-section
- -
- Power
- 16 W
- Maximum Pressure
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.