The No Frost Heating Cable 45m protects pipes from freezing and is activated automatically by a thermostat. The thermostat switches the cable on when the temperature drops below +3 °C and switches it off when the temperature rises above +15 °C. It can be installed on steel, copper and plastic pipes that can withstand temperatures of up to 90 °C.
The cable is laid along the pipe and secured with insulating tape every 30–60 cm. The thermostat must be in contact with the coldest point of the pipe. After installation, cover the protected section with thermal insulation. The kit can also be used to protect gutters, valves, meters and drainage wells from freezing, as well as to maintain the temperature of liquids in tanks and pipes.
- Type: Pipe frost protection kit
- Power per metre: 16 W/m
- Total power: 720 W
- Heating cable length: 45 m
- Power cord length: 2 m
- Power supply: 230 V
- Cable thickness: 8 mm
- Thermostat: Switches on below +3 °C and off above +15 °C
- Protection rating: IPX8
- Heating element: Stranded wire
- Material: Stainless steel
Dimensions
- Type
- Thermostat
- Compatibility
- -
- Construction Material [Pharmaceutical]
- Inox
- Smart / WiFi
- No
Technical Parameters
- Thread / Cross-section
- -
- Power
- 16 W
- Maximum Pressure
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.