The F&F AZ-112-LED dusk sensor switches the lighting on as daylight fades and off at dawn, using an external light sensor. The switching threshold is adjustable from 2 to 1,000 lx. The switch-on delay is approximately 10 s, and the switch-off delay is approximately 20 s. The sensor should be installed in a location exposed to light.
- Type: Dusk sensor
- Supply voltage: 230 V AC
- Rated current: 16 A
- Maximum AC-1 load current: 16 A (160 A/20 ms)
- Supply voltage tolerance: −10 to 10 %
- Output element: Relay
- Contact configuration: 1 × NO
- Contact separation: Yes
- Inrush current resistance for LED compatibility: Yes
- Adjustable switching threshold: 2–1,000 lx
- Hysteresis: Approximately 15 lx
- Switch-on delay: Approximately 10 s
- Switch-off delay: Approximately 20 s
- Photosensitive element: External sensor, Ø 10 mm
- Sensor protection rating: IP65
- Connection: Screw terminals, 2.5 mm²
- Tightening torque: 0.4 Nm
- Power consumption: 0.56 W
- Operating temperature: −25 to 50 °C
- Mounting: TH35 DIN rail, 1 module (18 mm)
- Protection rating: IP20
Specifications
- Nominal Voltage
- 230 V
- Rated Voltage
- 16 A
Features & Functions
- WiFi
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.