Skroutz.mt

GloboStar Waterproof LED Strip 220V RGB Light 1m Neon Flex
LED Strips

GloboStar Waterproof LED Strip 220V RGB Light 1m Neon Flex Code: 999-0245

The GloboStar 999-0245 OVALE LED strip features a lighting angle of 120° and is made with Epistar LED SMD 5050. This strip has a length of 1 meter and a power of 18W/m, with a density of 60 LED/m and...

The GloboStar 999-0245 OVALE LED strip features a lighting angle of 120° and is made with Epistar LED SMD 5050. This strip has a length of 1 meter and a power of 18W/m, with a density of 60 LED/m and a brightness of 1260lm/m. It is waterproof with a rating of IP68 and supports RGB colors with adjustable brightness. Its dimensions are L100 x W2.6 x H1.7 cm.

See full description See full description

  • Power Supply

    The power supply concerns the voltage of the current that the LED strip must have.

    2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

    220V

    The LED film is connected to the socket with a voltage of 220 volts, which is the household current voltage. In case the power supply is not included in the package, you will need to purchase it separately.

  • Protection certification

    "It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

    IP68

    LED films with an IP68 rating are mainly used in pools, lakes, and aquariums as they have complete protection against water and high protection against dust.

  • Light Shade

    RGB

    The led film can take various shades by combining the colors, red, green and blue.
  • See all
Review the product
Product report

Description

Description

The GloboStar 999-0245 OVALE LED strip features a lighting angle of 120° and is made with Epistar LED SMD 5050. This strip has a length of 1 meter and a power of 18W/m, with a density of 60 LED/m and a brightness of 1260lm/m. It is waterproof with a rating of IP68 and supports RGB colors with adjustable brightness. Its dimensions are L100 x W2.6 x H1.7 cm.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
999-0245

Dimensions

Length
1 m
Power Source
220V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

220V

The LED film is connected to the socket with a voltage of 220 volts, which is the household current voltage. In case the power supply is not included in the package, you will need to purchase it separately.
Light Colour
RGB

Light Colour

RGB
The led film can take various shades by combining the colors, red, green and blue.
Protection Certification
IP68

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP68
LED films with an IP68 rating are mainly used in pools, lakes, and aquariums as they have complete protection against water and high protection against dust.
USB
No

Additional Features

LED type
Neon Flex

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

Neon Flex

Neon Flex LED tapes consist of an LED tape covered with PVC plastic, giving a duller shade. They are flexible and durable, mainly used in commercial spaces (e.g. bars, casinos, theaters) and come in a variety of colors.
LED Density
60 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
18 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The GloboStar 999-0245 OVALE LED strip features a lighting angle of 120° and is made with Epistar LED SMD 5050. This strip has a length of 1 meter and a power of 18W/m, with a density of 60 LED/m and a brightness of 1260lm/m. It is waterproof with a rating of IP68 and supports RGB colors with adjustable brightness. Its dimensions are L100 x W2.6 x H1.7 cm.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
999-0245

Dimensions

Length
1 m
Power Source
220V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

220V

The LED film is connected to the socket with a voltage of 220 volts, which is the household current voltage. In case the power supply is not included in the package, you will need to purchase it separately.
Light Colour
RGB

Light Colour

RGB
The led film can take various shades by combining the colors, red, green and blue.
Protection Certification
IP68

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP68
LED films with an IP68 rating are mainly used in pools, lakes, and aquariums as they have complete protection against water and high protection against dust.
USB
No

Additional Features

LED type
Neon Flex

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

Neon Flex

Neon Flex LED tapes consist of an LED tape covered with PVC plastic, giving a duller shade. They are flexible and durable, mainly used in commercial spaces (e.g. bars, casinos, theaters) and come in a variety of colors.
LED Density
60 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
18 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

7,30 €
14,00 €   shipping cost