Garage Door Motors

Next Systems Sliding Garage Door Motor up to 500kg PICO500-er4-REPLACE-KIT

Automation set for sliding garage door with electronic control panel and 1 remote control. The REPLACE KIT concerns mechanisms for sliding gate doors and is recommended in cases where replacement of...

Automation set for sliding garage door with electronic control panel and 1 remote control. The REPLACE KIT concerns mechanisms for sliding gate doors and is recommended in cases where replacement of an existing mechanism is required.

Product code (SKU): PICO500-er4-REPLACE-KIT

Maximum leaf weight: 500Kg

Motor power: 280 Watt

Type of mechanism: Permanently...

See full description See full description

Description

Description

Automation set for sliding garage door with electronic control panel and 1 remote control. The REPLACE KIT concerns mechanisms for sliding gate doors and is recommended in cases where replacement of an existing mechanism is required.

Product code (SKU): PICO500-er4-REPLACE-KIT

Maximum leaf weight: 500Kg

Motor power: 280 Watt

Type of mechanism: Permanently lubricated with grease, non-reversible

Operations per hour: up to 25 for a door of indicative length 5 m, at 20°C

Motor operating voltage: 230 VAC (single-phase)

Set includes:

  • 1 PICO500 motor
  • 2 release keys (for manual operation)
  • 4 galvanized 8x25 DIN912 screws
  • 4 galvanized M8 washers
  • 4 square clip nuts M8
  • 1 metal mounting bracket
  • 2 metal strips (lamellas - stops) for activating limit switches
  • 1 er4 remote control
  • 1 e500-SL control panel
  • 1 user manual in Greek

Technical Specifications:

  • Product code: PICO500-er4-REPLACE-KIT
  • Power supply voltage: 230 VAC
  • Motor operating voltage: 230 VAC
  • Motor power consumption: 280 Watt
  • Power supply current: 1.5 A
  • Motor speed: 1400 rpm
  • Capacitor capacity: 12.5 μF
  • Maximum door weight: 500Kg
  • Type of mechanism: Electromechanical permanently lubricated with grease, non-reversible
  • Maximum usage frequency: S3-30% at 20°C
  • Operations per hour: up to 25 for a door of indicative length 5 m, at 20°C
  • Maximum leaf speed: 10 m / min
  • Motor winding thermal protection: 130 °C
  • Gear type: Z12 / m4 (12 teeth / module 4)
  • Type of limit switches: Mechanical - With microswitches and spring
  • Release method: With key
  • Operating temperature range: -20°C to +55°C
  • Degree of protection from dust and moisture: IP-44
  • Maximum thrust force: 450 N
  • Motor weight: 10 Kg
  • Motor dimensions: 293 mm x 234 mm x 295 mm (Length x Width x Height - without mounting bracket)
  • Motor box dimensions: 300 mm x 250 mm x 330 mm (Length x Width x Height)
  • Color: Gray
  • Packaging: White cardboard box
  • CE Compliance: YES

Innovative Design: Outdoor use, Compact Design.

Simple & Functional: Easy Release, High Durability.

Manufacturer

See full description

Specifications

Specifications

Type
Sliding
Maximum Weight
500 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Automation set for sliding garage door with electronic control panel and 1 remote control. The REPLACE KIT concerns mechanisms for sliding gate doors and is recommended in cases where replacement of an existing mechanism is required.

Product code (SKU): PICO500-er4-REPLACE-KIT

Maximum leaf weight: 500Kg

Motor power: 280 Watt

Type of mechanism: Permanently lubricated with grease, non-reversible

Operations per hour: up to 25 for a door of indicative length 5 m, at 20°C

Motor operating voltage: 230 VAC (single-phase)

Set includes:

  • 1 PICO500 motor
  • 2 release keys (for manual operation)
  • 4 galvanized 8x25 DIN912 screws
  • 4 galvanized M8 washers
  • 4 square clip nuts M8
  • 1 metal mounting bracket
  • 2 metal strips (lamellas - stops) for activating limit switches
  • 1 er4 remote control
  • 1 e500-SL control panel
  • 1 user manual in Greek

Technical Specifications:

  • Product code: PICO500-er4-REPLACE-KIT
  • Power supply voltage: 230 VAC
  • Motor operating voltage: 230 VAC
  • Motor power consumption: 280 Watt
  • Power supply current: 1.5 A
  • Motor speed: 1400 rpm
  • Capacitor capacity: 12.5 μF
  • Maximum door weight: 500Kg
  • Type of mechanism: Electromechanical permanently lubricated with grease, non-reversible
  • Maximum usage frequency: S3-30% at 20°C
  • Operations per hour: up to 25 for a door of indicative length 5 m, at 20°C
  • Maximum leaf speed: 10 m / min
  • Motor winding thermal protection: 130 °C
  • Gear type: Z12 / m4 (12 teeth / module 4)
  • Type of limit switches: Mechanical - With microswitches and spring
  • Release method: With key
  • Operating temperature range: -20°C to +55°C
  • Degree of protection from dust and moisture: IP-44
  • Maximum thrust force: 450 N
  • Motor weight: 10 Kg
  • Motor dimensions: 293 mm x 234 mm x 295 mm (Length x Width x Height - without mounting bracket)
  • Motor box dimensions: 300 mm x 250 mm x 330 mm (Length x Width x Height)
  • Color: Gray
  • Packaging: White cardboard box
  • CE Compliance: YES

Innovative Design: Outdoor use, Compact Design.

Simple & Functional: Easy Release, High Durability.

Manufacturer

Type
Sliding
Maximum Weight
500 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

210,00 €
26,00 €   shipping cost