Skroutz.mt

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 500kg
Garage Door Motor Set

Next Systems Set Garage Door Motor for Sliding Door for Maximum Weight 500kg

Garage door automation kit with an electronic control panel, 2 remote controls, wired safety photocells, and 4 meters of metal gear rack with spacers.

  • Product Code (SKU): PICO500-em4-FULL-KIT
  • Maximum...

Garage door automation kit with an electronic control panel, 2 remote controls, wired safety photocells, and 4 meters of metal gear rack with spacers.

  • Product Code (SKU): PICO500-em4-FULL-KIT
  • Maximum door panel weight: 500kg
  • Motor power: 280 Watts
  • Mechanism type: Permanently lubricated with grease, Non-reversible
  • Open/close cycles per hour: up to 25 for a...
See full description See full description
Review the product
Product report

Description

Description

Garage door automation kit with an electronic control panel, 2 remote controls, wired safety photocells, and 4 meters of metal gear rack with spacers.

  • Product Code (SKU): PICO500-em4-FULL-KIT
  • Maximum door panel weight: 500kg
  • Motor power: 280 Watts
  • Mechanism type: Permanently lubricated with grease, Non-reversible
  • Open/close cycles per hour: up to 25 for a 5m door at 20°C
  • Motor operating voltage: 230 VAC (single-phase)

CONTENTS OF THE KIT:

  • 1 PICO500 motor
  • 2 release keys (manual operation)
  • 4 galvanized DIN912 8x25 screws
  • 4 galvanized M8 washers
  • 4 M8 square snap-on nuts
  • 1 metal mounting base
  • 2 metal plates (stops) for activating limit switches
  • 1 safety photocell set (transmitter & receiver) AGO-20
  • 2 e4 remote controls
  • 1 e500-SL control board
  • 1 Greek language user manual

Technical Specifications:

  • Power supply voltage: 230 VAC
  • Motor absorbed power: 280 Watts
  • Supply current: 1.5 A
  • Motor speed: 1400 rpm
  • Capacitor capacity: 12.5 μF
  • Maximum door panel speed: 10 m/min
  • Motor winding thermal protection: 130°C
  • Operating temperature range: -20°C to +55°C
  • Protection rating against dust and moisture: IP-44
  • Motor weight: 10 kg
  • Motor dimensions: 293 mm x 234 mm x 295 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
500 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Maximum Door Length
4 m
Built-in Control Panel
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
2 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
External Antenna
1 pcs

External Antenna

It enhances the signal range, allowing the use of remote controls from a greater distance. It is usually installed outside of metal shutters, as the metal surface obstructs the signal from going out.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Garage door automation kit with an electronic control panel, 2 remote controls, wired safety photocells, and 4 meters of metal gear rack with spacers.

  • Product Code (SKU): PICO500-em4-FULL-KIT
  • Maximum door panel weight: 500kg
  • Motor power: 280 Watts
  • Mechanism type: Permanently lubricated with grease, Non-reversible
  • Open/close cycles per hour: up to 25 for a 5m door at 20°C
  • Motor operating voltage: 230 VAC (single-phase)

CONTENTS OF THE KIT:

  • 1 PICO500 motor
  • 2 release keys (manual operation)
  • 4 galvanized DIN912 8x25 screws
  • 4 galvanized M8 washers
  • 4 M8 square snap-on nuts
  • 1 metal mounting base
  • 2 metal plates (stops) for activating limit switches
  • 1 safety photocell set (transmitter & receiver) AGO-20
  • 2 e4 remote controls
  • 1 e500-SL control board
  • 1 Greek language user manual

Technical Specifications:

  • Power supply voltage: 230 VAC
  • Motor absorbed power: 280 Watts
  • Supply current: 1.5 A
  • Motor speed: 1400 rpm
  • Capacitor capacity: 12.5 μF
  • Maximum door panel speed: 10 m/min
  • Motor winding thermal protection: 130°C
  • Operating temperature range: -20°C to +55°C
  • Protection rating against dust and moisture: IP-44
  • Motor weight: 10 kg
  • Motor dimensions: 293 mm x 234 mm x 295 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Motor type
Sliding

Motor type

Sliding
Suitable for residential and commercial entrances, when there is available space for opening, as wide as the entrance width.
Maximum Weight
500 kg

Maximum Weight

Describes the maximum weight of the garage door that is suitable for the motor.
Maximum Door Length
4 m
Built-in Control Panel
No

Set Contents

Motor
1 pcs
Control Panel
1 pcs
Remote Control
2 pcs
Security Beacon
1 pcs

Security Beacon

During motor operation, it flashes indicating that the door is moving. It is used as a safety accessory and where there is low visibility when exiting the vehicle.
External Antenna
1 pcs

External Antenna

It enhances the signal range, allowing the use of remote controls from a greater distance. It is usually installed outside of metal shutters, as the metal surface obstructs the signal from going out.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

250,00 €
38,00 €   shipping cost