3D Printer Filament

Elegoo Rapid PLA+ 1.75mm Grey 1kg 1 Piece (Spool) 3D Printer Filament

ELEGOO Rapid PLA+ filament is designed for fast technical prints and projects where accuracy and repeatability matter, such as prototypes and structural components. It is a biodegradable, plant-based...

ELEGOO Rapid PLA+ filament is designed for fast technical prints and projects where accuracy and repeatability matter, such as prototypes and structural components. It is a biodegradable, plant-based material enhanced with additives for increased durability, while the gray color helps conceal minor imperfections and highlights the model’s shape.

The filament...

See full description See full description

Top specs

  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
10 50 €
Delivery by Wed, 25 Nov
14,00 €   shipping cost
Sent from Greece
From TheMlab 5.0 (54)
Greece
19 pieces
See Printer Supplies on the page of TheMlab

Learn more about invoicing

Description

Description

ELEGOO Rapid PLA+ filament is designed for fast technical prints and projects where accuracy and repeatability matter, such as prototypes and structural components. It is a biodegradable, plant-based material enhanced with additives for increased durability, while the gray color helps conceal minor imperfections and highlights the model’s shape.

The filament melts quickly and flows smoothly through the nozzle, supporting print speeds of up to 600 mm/s with a properly configured printer. Compared with standard PLA, it offers greater flexibility and resistance to cracking, while its thermal conductivity helps the layers bond. It is mechanically wound and manually inspected to reduce tangles. The spool is made from recycled cardboard, and the filament is vacuum-sealed with a desiccant.

  • Material: PLA+
  • Color: Gray
  • Weight: 1 kg
  • Diameter: 1.75 mm
  • Dimensional tolerance: ± 0.02 mm
  • Maximum print speed: 600 mm/s
  • Drying before printing: 55 ± 5 °C
  • Ambient temperature and humidity: up to 50 °C, up to 20% relative humidity
  • Nozzle temperature: 200–230 °C
  • Bed temperature: 35–65 °C
  • Build surface type: Textured PEI or other compatible plates
  • Density: 1.23 g/cm³
  • Melting point: 160 °C
  • Heat deflection temperature: 57 °C
  • Softening temperature (Vicat test): 62 °C
  • Tensile strength (XY): 39 ± 2 MPa
  • Elongation at break (XY): 8.5% ± 1.2%
  • Flexural strength (XY): 71 ± 6 MPa
  • Flexural modulus (XY): 2846 ± 175 MPa
  • Impact strength (XY): 50.4 ± 2.8 kJ/m²
  • Filament packaging: Recycled cardboard spool

Manufacturer

See full description

Specifications

Specifications

Material
PLA+
Colour
Grey
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (14)

Reviews

  1. 12
  2. 2
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

Description & Specifications

ELEGOO Rapid PLA+ filament is designed for fast technical prints and projects where accuracy and repeatability matter, such as prototypes and structural components. It is a biodegradable, plant-based material enhanced with additives for increased durability, while the gray color helps conceal minor imperfections and highlights the model’s shape.

The filament melts quickly and flows smoothly through the nozzle, supporting print speeds of up to 600 mm/s with a properly configured printer. Compared with standard PLA, it offers greater flexibility and resistance to cracking, while its thermal conductivity helps the layers bond. It is mechanically wound and manually inspected to reduce tangles. The spool is made from recycled cardboard, and the filament is vacuum-sealed with a desiccant.

  • Material: PLA+
  • Color: Gray
  • Weight: 1 kg
  • Diameter: 1.75 mm
  • Dimensional tolerance: ± 0.02 mm
  • Maximum print speed: 600 mm/s
  • Drying before printing: 55 ± 5 °C
  • Ambient temperature and humidity: up to 50 °C, up to 20% relative humidity
  • Nozzle temperature: 200–230 °C
  • Bed temperature: 35–65 °C
  • Build surface type: Textured PEI or other compatible plates
  • Density: 1.23 g/cm³
  • Melting point: 160 °C
  • Heat deflection temperature: 57 °C
  • Softening temperature (Vicat test): 62 °C
  • Tensile strength (XY): 39 ± 2 MPa
  • Elongation at break (XY): 8.5% ± 1.2%
  • Flexural strength (XY): 71 ± 6 MPa
  • Flexural modulus (XY): 2846 ± 175 MPa
  • Impact strength (XY): 50.4 ± 2.8 kJ/m²
  • Filament packaging: Recycled cardboard spool

Manufacturer

Material
PLA+
Colour
Grey
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (14)

  1. 12
  2. 2
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

10,50 €
14,00 €   shipping cost