ELEGOO PLA+ filament has a smooth surface and produces fine details in prototype and decorative object prints. Its composition is plant-based and biodegradable, with additives for increased durability. It offers greater crack resistance and better layer adhesion than standard PLA, while remaining just as easy to print.
The filament is evenly wound on the spool and is compatible with most FDM printers that support a 1.75 mm diameter. The packaging is airtight and includes a desiccant.
- Material: PLA+
- Color: Orange
- Weight: 1 kg
- Diameter: 1.75 mm
- Dimensional accuracy: ± 0.02 mm
- Filament packaging: Spool
- Recommended drying temperature before printing: 55 ± 5 °C
- Ambient temperature and humidity: ≤ 50 °C, ≤ 20% relative humidity
- Nozzle temperature: 200–230 °C
- Build plate temperature: 35–65 °C
- Print surface: Textured PEI or other compatible plates
- Printing speed: Less than 280 mm/sec
- Density: 1.30 g/cm³
- Melting point: 161 °C
- Heat deflection temperature under load: 56 °C
- Vicat softening temperature: 63 °C
- Tensile strength (XY): 38 ± 2 MPa
- Elongation at break (XY): 7.9% ± 1.6%
- Flexural strength (XY): 74 ± 4 MPa
- Flexural modulus (XY): 2979 ± 156 MPa
- Impact strength (XY): 65.5 ± 3.6 kJ/m²
- Material
- PLA+
- Colour
- Orange
- Diameter
- 1.75 mm
- Weight
- 1 kg
- Filament Packaging
- Spool
- Quantity
- 1 pcs
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.