The ELEGOO PLA+ filament in blue is designed for FDM printers that support 1.75 mm filament. It offers greater resistance to breakage and better layer adhesion than standard PLA, while remaining just as easy to print. It is made from biodegradable, plant-based material with additives for increased durability.

The even winding and manual inspection of the filament help reduce the risk of tangling. The spool is vacuum-sealed with a moisture absorber.

• Material: PLA+
• Color: Blue
• Diameter: 1.75 mm
• Weight: 1 kg
• Packaging: Spool
• Dimensional accuracy: ± 0.02 mm
• Compatibility: FDM printers that support 1.75 mm filament
• Drying settings before printing: 55 ± 5 °C
• Ambient temperature and humidity: Up to 50 °C, up to 20% relative humidity
• Nozzle temperature: 200–230 °C
• Build plate temperature: 35–65 °C
• Print surface: Textured PEI or other compatible plates
• Printing speed: Less than 280 mm/sec
• Density: 1.30 g/cm³
• Melting point: 161 °C
• Heat deflection temperature under load: 56 °C
• Vicat softening temperature: 63 °C
• Tensile strength (XY): 38 ± 2 MPa
• Elongation at break (XY): 7.9% ± 1.6%
• Flexural strength (XY): 74 ± 4 MPa
• Flexural modulus (XY): 2,979 ± 156 MPa
• Impact strength (XY): 65.5 ± 3.6 kJ/m²