ELEGOO PLA+ filament has a matte gray finish and is designed for technical prints and decorative projects. It is made from plant-based, biodegradable PLA+ with additives for increased durability. Compared with standard PLA, it offers greater resistance to cracking and better layer adhesion while remaining just as easy to print.
It has a consistent diameter with dimensional accuracy of ± 0.02 mm. The filament is evenly wound and hand-inspected to reduce the risk of tangling. Its smooth surface and good thermal conductivity help produce clean prints without warping. The packaging is airtight and includes a desiccant. It is compatible with most FDM printers that support 1.75 mm filament.
- Material: PLA+
- Color: Gray
- Weight: 1 kg
- Filament diameter: 1.75 mm
- Packaging: Spool
- Quantity: 1 piece
- Dimensional accuracy: ± 0.02 mm
- Recommended drying temperature before printing: 55 ± 5 °C
- Recommended ambient temperature: Up to 50 °C
- Recommended relative humidity: Up to 20%
- Storage: With desiccant
- Nozzle temperature: 200–230 °C
- Bed temperature: 35–65 °C
- Print surface: Textured PEI or other compatible build plates
- Print speed: Less than 280 mm/sec
- Density: 1.30 g/cm³
- Melting point: 161 °C
- Heat deflection temperature: 56 °C
- Vicat softening temperature: 63 °C
- Tensile strength (XY): 38 ± 2 MPa
- Elongation at break (XY): 7.9% ± 1.6%
- Flexural strength (XY): 74 ± 4 MPa
- Flexural modulus (XY): 2979 ± 156 MPa
- Impact strength (XY): 65.5 ± 3.6 kJ/m²
- Material
- PLA+
- Colour
- Grey
- Diameter
- 1.75 mm
- Weight
- 1 kg
- Filament Packaging
- Spool
- Quantity
- 1 pcs
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.