Skroutz.mt

Cudy AP1300 Wall v1 Access Point Wi‑Fi 4
Access Points

Cudy AP1300 Wall v1 Access Point Wi‑Fi 4

The Cudy AP1300 Wall v1 is an indoor access point for wall or ceiling mounting, with Wi-Fi 4 and PoE support. Its 5 dBi internal antennas support the 802.11a and 802.11 b/g/n standards, while the...

The Cudy AP1300 Wall v1 is an indoor access point for wall or ceiling mounting, with Wi-Fi 4 and PoE support. Its 5 dBi internal antennas support the 802.11a and 802.11 b/g/n standards, while the Gigabit Ethernet port provides a wired connection.

  • Wi-Fi generation: Wi-Fi 4
  • Networking standards: IEEE 802.11a, IEEE 802.11 b/g/n
  • LAN speed: 1000 Mbps
  • Mounting:...
See full description See full description

Top specs

  • Wi-Fi Generation

    Wi‑Fi 4

    Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

    For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
  • See all
46 90 €
Delivery by Mon, 09 Nov
14,00 €   shipping cost
Sent from Greece
From Ravolta 5.0 (6)
5.0 (6 reviews)
Greece
3 pieces
See Networking on the page of Ravolta

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Cudy AP1300 Wall v1 is an indoor access point for wall or ceiling mounting, with Wi-Fi 4 and PoE support. Its 5 dBi internal antennas support the 802.11a and 802.11 b/g/n standards, while the Gigabit Ethernet port provides a wired connection.

  • Wi-Fi generation: Wi-Fi 4
  • Networking standards: IEEE 802.11a, IEEE 802.11 b/g/n
  • LAN speed: 1000 Mbps
  • Mounting: Indoor, wall or ceiling
  • PoE support: Yes
  • Antenna gain: Up to 5 dBi
  • Package: Single kit

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
5 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Cudy AP1300 Wall v1 is an indoor access point for wall or ceiling mounting, with Wi-Fi 4 and PoE support. Its 5 dBi internal antennas support the 802.11a and 802.11 b/g/n standards, while the Gigabit Ethernet port provides a wired connection.

  • Wi-Fi generation: Wi-Fi 4
  • Networking standards: IEEE 802.11a, IEEE 802.11 b/g/n
  • LAN speed: 1000 Mbps
  • Mounting: Indoor, wall or ceiling
  • PoE support: Yes
  • Antenna gain: Up to 5 dBi
  • Package: Single kit

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
5 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

46,90 €
14,00 €   shipping cost