Instructions for Use: Remove residues of old paints and rust. Lightly sand and apply primer if needed. Cover areas you do not want to paint. The surface must be clean, dry, and free of grease. Before use, shake the container for 3 minutes. Test the spray paint color and compatibility of the varnish on an inconspicuous area. Spray a thin coat from approximately 25 cm away. Then, repeat and spray one or two more thin coats with 1-minute intervals. Do not spray over synthetic paints!

Warning Word: Danger. Hazardous components: acetone, n-butyl acetate, 2-methoxy-1-methylethyl acetate.

• Hazard statements: Extremely flammable aerosol. Pressurized container. May burst when heated. Causes serious eye irritation. May cause drowsiness or dizziness.
• Precautionary statements: If medical advice is needed, have the container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. Do not smoke. Do not spray near an open flame or other ignition sources. Do not pierce or burn, even after use. Do not breathe spray fumes. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Dispose of contents/container according to local regulations.
• Additional statements: EUH066 Prolonged exposure may cause dryness of the skin or cracking. Flammable mixtures may form in poorly ventilated areas.
• Additional information: The benzene content (EINECS Number 200-753-7) in the ingredients is less than 0.1%. Therefore, classification as carcinogenic is not required. Xylene: Contains ethylbenzene CAS 100-41-4.