Instructions for use: Clean the surface from dirt, grease, and rust. Before use, shake the container for 3 minutes. The spraying distance should be approximately 20-30 cm. Spray in intervals of 3 - 5 minutes with several thin layers. Metallic colors should be covered with a clear varnish after 30 minutes of drying time. Otherwise, the aluminum particles will be destroyed by environmental and weather effects. Do not spray over synthetic paints!

Warning word: Danger.

• Hazardous ingredients must be listed on the labels: acetone, n-Butyl ethyl ether, 2-methoxy-1-methylethyl acetate.
• Extremely flammable aerosol. Pressurized container. May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Precautionary statements:

• If medical advice is needed, have the product container or label at hand.
• Keep out of reach of children.
• Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources.
• Do not smoke.
• Do not spray near open flames or other ignition sources.
• Do not pierce or burn, even after use.
• Do not inhale vapors.
• Protect from sunlight.
• Do not expose to temperatures exceeding 50 °C.
• Dispose of contents/container in accordance with local regulations.

Supplementary statements: EUH066 Prolonged exposure may cause skin dryness or cracking. Inadequate ventilation can cause explosive mixtures to form.

Additional information: Xylene: Contains ethylbenzene, CAS number 100-41-4, CAS 9004-70-0: GB CLP Note T.