Instructions for use:

• Remove old paints and dirt and sand the surface.
• The surface must be clean, dry, and free of grease.
• Do not apply primer.
• Best results are achieved on bare metal.
• Cover areas that will not be painted.
• Before use, shake the container for 2 minutes.
• Test the paint and compatibility on an inconspicuous spot.
• Spray several thin coats with 2-minute intervals.
• The spray distance should be about 25 cm.
• Allow to dry for 1 hour.
• Heat for about 1 hour at 160°C to stabilize the color.
• Ensure adequate ventilation during this process.

Warning: Danger.

Hazardous components: Hydrocarbons C6-C7, n-alkanes, isoalkanes, cyclic.

Hazard statements: Extremely flammable aerosol. Pressure container. May burst when heated. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long-lasting effects.

Precautionary statements: If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. Do not smoke. Do not spray near an open flame or other ignition sources. Do not pierce or burn, even after use. Do not breathe vapors. Protect from sunlight. Do not expose to temperatures exceeding 50°C. Dispose of contents/container according to local regulations.

Additional statements: Explosive mixtures may form under insufficient ventilation. EUH211 Warning! Hazardous respiratory droplets may be formed during spraying. Do not inhale spray or mist.

Additional information: The benzene content (EINECS No. 200-753-7) in the ingredients is less than 0.1%, so classification as carcinogenic is not required. Xylene: Contains ethylbenzene CAS 100-41-4.