Skroutz.mt

Techly Point-to-Point CPE Access Point Single Band (5GHz)
Access Points

Techly Point-to-Point CPE Access Point Single Band (5GHz)

The Techly I-WL-CPE880 access point supports AP and Repeater modes for wireless data transmission and network extension. Its dual-polarized MIMO antenna offers a maximum gain of 15 dBi, while PoE...

The Techly I-WL-CPE880 access point supports AP and Repeater modes for wireless data transmission and network extension. Its dual-polarized MIMO antenna offers a maximum gain of 15 dBi, while PoE power allows installation without a nearby power outlet.

  • Maximum WLAN speed: 300 Mbps
  • Frequency: 5.8 GHz
  • Antenna: Internal dual-polarized MIMO
  • Maximum antenna...
See full description See full description

Top specs

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Single Band (5GHz)

    An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
  • See all
152 90 €
Delivery Tue, 24 Nov - Mon, 30 Nov
14,00 €   shipping cost
Sent from Greece
From Getters 4.5 (117)
4.5 (117 reviews)
Greece
See Networking on the page of Getters

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Techly I-WL-CPE880 access point supports AP and Repeater modes for wireless data transmission and network extension. Its dual-polarized MIMO antenna offers a maximum gain of 15 dBi, while PoE power allows installation without a nearby power outlet.

  • Maximum WLAN speed: 300 Mbps
  • Frequency: 5.8 GHz
  • Antenna: Internal dual-polarized MIMO
  • Maximum antenna gain: 15 dBi
  • Modes: AP, Repeater
  • Installation: Indoor
  • Power supply: PoE, DC 12 V, 1 A
  • Ports: 1 Ethernet LAN (RJ-45), 1 Ethernet WAN (RJ-45)
  • Standards: IEEE 802.11a, IEEE 802.11n, IEEE 802.3
  • Management: Web-based, software updates, syslog
  • Operating temperature: -40 to 55 °C
  • Operating relative humidity: 10–95%
  • Dimensions: 90 × 262 × 38 mm
  • Color: White
  • Certifications: CE, WEEE
  • Packaging: Single kit

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Single Band (5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (5GHz)
An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
Maximum WLAN Speed
300 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
15 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Techly I-WL-CPE880 access point supports AP and Repeater modes for wireless data transmission and network extension. Its dual-polarized MIMO antenna offers a maximum gain of 15 dBi, while PoE power allows installation without a nearby power outlet.

  • Maximum WLAN speed: 300 Mbps
  • Frequency: 5.8 GHz
  • Antenna: Internal dual-polarized MIMO
  • Maximum antenna gain: 15 dBi
  • Modes: AP, Repeater
  • Installation: Indoor
  • Power supply: PoE, DC 12 V, 1 A
  • Ports: 1 Ethernet LAN (RJ-45), 1 Ethernet WAN (RJ-45)
  • Standards: IEEE 802.11a, IEEE 802.11n, IEEE 802.3
  • Management: Web-based, software updates, syslog
  • Operating temperature: -40 to 55 °C
  • Operating relative humidity: 10–95%
  • Dimensions: 90 × 262 × 38 mm
  • Color: White
  • Certifications: CE, WEEE
  • Packaging: Single kit

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Single Band (5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (5GHz)
An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
Maximum WLAN Speed
300 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
Antenna Power (max)
15 dBi

Antenna Power (max)

Indicates how "directional" the antenna's signal is. A higher value means greater range in a specific direction, while a lower value offers more uniform coverage around the device.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.

General Characteristics

Placement
Indoor
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

152,90 €
14,00 €   shipping cost