Rapid-setting gel glue particularly strong and suitable for porous and vertical surfaces. It is water-resistant and can be applied to ceramics, wood, plastics, metal, and other materials, with the exception of PE, PP, PTFE, silicone, polystyrene foam, fabrics, and leather clothing.

• Properties: Extremely quick and strong, penetrates into the smallest corners and joints.
• Application: Ideal for small bonds.
• Suitable for: Multiple materials such as hard PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®), phenolic resins (Bakelite®), porcelain, ceramics, leather, metal, wood, cork, felt, fabric, and rubber.
• Not suitable for: PE, PP, silicone-based resins, PTFE, polystyrene foam, fabrics, and leather clothing.

Handling: Do not use at temperatures below +10 °C. Surfaces must be clean, dry, and free of dust or grease. The best preparation includes rubbing with suitable solvents such as acetone.

Instructions for use: Puncture the membrane by turning the cap clockwise. Apply the glue as thinly as possible on one side and press the parts together immediately. After use, clean the nozzle with dry tissue.

Precautions: Contains cyanoacrylate. Bonds skin and eyelids. In case of contact with eyes, rinse with plenty of water and seek medical assistance. Avoid inhaling vapors. Do not use near children.

Storage conditions: Keep in a dry, cool place without freezing, preferably below +5 °C.

Technical features:

• Chemical base: Ethyl cyanoacrylate
• Color: Clear crystalline
• Density: approx. 1.05 g/cm³
• Final bonding strength: 12 N/mm²
• Initial setting time: 5–60 seconds
• Minimum temperature resistance: -40 °C
• Maximum temperature resistance: 80 °C
• Water resistance: Very good