Switches

Mercusys MS118CP PoE+ Switch with 16 Ethernet Ports and 2 SFP Ports

The Mercusys MS118CP switch connects network devices through 16 10/100 Mbps PoE+ ports, 2 Gigabit RJ45 ports, and 2 Gigabit SFP combo ports. The PoE+ ports transmit data and power over the same...

The Mercusys MS118CP switch connects network devices through 16 10/100 Mbps PoE+ ports, 2 Gigabit RJ45 ports, and 2 Gigabit SFP combo ports. The PoE+ ports transmit data and power over the same cable, supplying up to 30 W per port, with a total power budget of 190 W. It can be used in IP surveillance systems for small and medium-sized businesses, as well as...

See full description See full description
108 89 €
Delivery by Fri, 20 Nov
14,00 €   shipping cost
Sent from Greece
From Allaboutoffice 4.8 (40)
Greece
See Networking on the page of Allaboutoffice

Learn more about invoicing

Description

Description

The Mercusys MS118CP switch connects network devices through 16 10/100 Mbps PoE+ ports, 2 Gigabit RJ45 ports, and 2 Gigabit SFP combo ports. The PoE+ ports transmit data and power over the same cable, supplying up to 30 W per port, with a total power budget of 190 W. It can be used in IP surveillance systems for small and medium-sized businesses, as well as with VoIP phones and access points.

Extend mode enables data and power transmission over distances of up to 250 m, while Isolation mode isolates traffic on each port. Priority mode applies to ports 1–8, and PoE Auto Recovery reboots unresponsive devices. The metal housing features 2 built-in fans and a security lock system.

  • PoE+ Ethernet ports: 16 × 10/100 Mbps RJ45
  • Additional Ethernet ports: 2 × 10/100/1000 Mbps RJ45
  • SFP ports: 2 Gigabit combo ports
  • PoE+ power: Up to 30 W per port, with a total power budget of 190 W
  • PoE standards: IEEE 802.3af, IEEE 802.3at
  • Switching capacity: 7.2 Gbps
  • MAC address table: 8,000 entries
  • Jumbo Frame support: 10 KB
  • Packet forwarding rate: 5.36 Mpps
  • Transmission method: Store-and-forward
  • Standards and protocols: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3z, IEEE 802.3af, IEEE 802.3at
  • Transmission media: 10BASE-T with Category 3, 4, or 5 UTP or EIA/TIA-568 100 Ω STP, up to 100 m; 100BASE-TX with Category 5 or 5e UTP or EIA/TIA-568 100 Ω STP, up to 100 m; 1000BASE-T with Category 5, 5e, 6, or higher UTP or EIA/TIA-568 100 Ω STP, up to 100 m; 1000BASE-X with MMF or SMF
  • Extend mode: Data and power transmission up to 250 m
  • Isolation mode: Traffic isolation on ports 1–16
  • Priority mode: Priority for ports 1–8
  • PoE Auto Recovery: Reboots unresponsive devices on ports 1–16
  • Additional features: IEEE 802.3x Flow Control, automatic MAC address learning and aging, plug-and-play
  • LED indicators: Link, activity, and PoE status for each Ethernet port, PoE Max, and power
  • Housing: Metal, with a security lock system
  • Cooling: 2 built-in fans
  • Mounting: Desktop, wall, or rack
  • Power supply: 100–240 V AC, 50/60 Hz
  • Maximum power consumption: 13.07 W with no PD connected and 218.91 W with a 190 W PD connected, at 220 V / 50 Hz
  • Maximum heat dissipation: 44.57 BTU/h with no PD connected and 746.48 BTU/h with a 190 W PD connected
  • Operating temperature: 0 to 50 °C
  • Storage temperature: -40 to 70 °C
  • Operating humidity: 10% to 90% RH, non-condensing
  • Storage humidity: 5% to 90% RH, non-condensing
  • Dimensions: 440 × 180 × 44 mm
  • Certifications: CE, FCC, RoHS
  • Package contents: Switch, power adapter, 2 mounting brackets with hardware, and user manual

Manufacturer

See full description

Specifications

Specifications

Network Specifications

PoE
Yes
PoE Version
802.3af, 802.3at

Technical Specifications

Ethernet connections
16 Port
Ethernet Speed
100 Mbps
SFP connections
2 Port
Switching Speed
7.2 Gbps
MAC Address Table
8000 entries
Rack mounting
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Mercusys MS118CP switch connects network devices through 16 10/100 Mbps PoE+ ports, 2 Gigabit RJ45 ports, and 2 Gigabit SFP combo ports. The PoE+ ports transmit data and power over the same cable, supplying up to 30 W per port, with a total power budget of 190 W. It can be used in IP surveillance systems for small and medium-sized businesses, as well as with VoIP phones and access points.

Extend mode enables data and power transmission over distances of up to 250 m, while Isolation mode isolates traffic on each port. Priority mode applies to ports 1–8, and PoE Auto Recovery reboots unresponsive devices. The metal housing features 2 built-in fans and a security lock system.

  • PoE+ Ethernet ports: 16 × 10/100 Mbps RJ45
  • Additional Ethernet ports: 2 × 10/100/1000 Mbps RJ45
  • SFP ports: 2 Gigabit combo ports
  • PoE+ power: Up to 30 W per port, with a total power budget of 190 W
  • PoE standards: IEEE 802.3af, IEEE 802.3at
  • Switching capacity: 7.2 Gbps
  • MAC address table: 8,000 entries
  • Jumbo Frame support: 10 KB
  • Packet forwarding rate: 5.36 Mpps
  • Transmission method: Store-and-forward
  • Standards and protocols: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3z, IEEE 802.3af, IEEE 802.3at
  • Transmission media: 10BASE-T with Category 3, 4, or 5 UTP or EIA/TIA-568 100 Ω STP, up to 100 m; 100BASE-TX with Category 5 or 5e UTP or EIA/TIA-568 100 Ω STP, up to 100 m; 1000BASE-T with Category 5, 5e, 6, or higher UTP or EIA/TIA-568 100 Ω STP, up to 100 m; 1000BASE-X with MMF or SMF
  • Extend mode: Data and power transmission up to 250 m
  • Isolation mode: Traffic isolation on ports 1–16
  • Priority mode: Priority for ports 1–8
  • PoE Auto Recovery: Reboots unresponsive devices on ports 1–16
  • Additional features: IEEE 802.3x Flow Control, automatic MAC address learning and aging, plug-and-play
  • LED indicators: Link, activity, and PoE status for each Ethernet port, PoE Max, and power
  • Housing: Metal, with a security lock system
  • Cooling: 2 built-in fans
  • Mounting: Desktop, wall, or rack
  • Power supply: 100–240 V AC, 50/60 Hz
  • Maximum power consumption: 13.07 W with no PD connected and 218.91 W with a 190 W PD connected, at 220 V / 50 Hz
  • Maximum heat dissipation: 44.57 BTU/h with no PD connected and 746.48 BTU/h with a 190 W PD connected
  • Operating temperature: 0 to 50 °C
  • Storage temperature: -40 to 70 °C
  • Operating humidity: 10% to 90% RH, non-condensing
  • Storage humidity: 5% to 90% RH, non-condensing
  • Dimensions: 440 × 180 × 44 mm
  • Certifications: CE, FCC, RoHS
  • Package contents: Switch, power adapter, 2 mounting brackets with hardware, and user manual

Manufacturer

Network Specifications

PoE
Yes
PoE Version
802.3af, 802.3at

Technical Specifications

Ethernet connections
16 Port
Ethernet Speed
100 Mbps
SFP connections
2 Port
Switching Speed
7.2 Gbps
MAC Address Table
8000 entries
Rack mounting
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

108,89 €
14,00 €   shipping cost