Skroutz.mt

Kobra 3 V2 Assembled 3D Printer with USB Connection
3D Printers

Kobra 3 V2 Assembled 3D Printer with USB Connection

The Anycubic Kobra 3 V2 is an FDM 3D printer with the LeviQ 3.0 auto-leveling system. Its 60 mm-wide Y-axis, SG15 bearings on the X-axis, and dual lead screws contribute to structural stability and...

The Anycubic Kobra 3 V2 is an FDM 3D printer with the LeviQ 3.0 auto-leveling system. Its 60 mm-wide Y-axis, SG15 bearings on the X-axis, and dual lead screws contribute to structural stability and first-layer adhesion. It offers a maximum print speed of 600 mm/s and acceleration of up to 20,000 mm/s², and supports PLA, TPU, PETG, and ABS filaments.

The...

See full description See full description

Top specs

  • Consumable

    Filament

    Plastic filament (e.g. PLA, ABS, PETG) that is heated, melted, and deposited layer by layer to create objects in FDM 3D printers. Inexpensive, easy to use, wide variety of materials.

  • Type

    Assembled

    3D printer that requires assembly before use.
  • Connectivity USB
  • See all
405 90 €
Delivery Wed, 11 Nov - Tue, 17 Nov
62,00 €   shipping cost
Sent from Greece
From Getters 4.6 (112)
4.6 (112 reviews)
Greece
1 piece
See 3D Printers & Accessories on the page of Getters

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Anycubic Kobra 3 V2 is an FDM 3D printer with the LeviQ 3.0 auto-leveling system. Its 60 mm-wide Y-axis, SG15 bearings on the X-axis, and dual lead screws contribute to structural stability and first-layer adhesion. It offers a maximum print speed of 600 mm/s and acceleration of up to 20,000 mm/s², and supports PLA, TPU, PETG, and ABS filaments.

The nozzle features a quick-release metal connector, while its design helps prevent filament leakage. The printer features filament detection and automatic replenishment, print resumption after a power outage, and a 720p camera for monitoring, timelapse recording, and AI print error detection. It supports object skipping and area-based leveling. The Anycubic Slicer Next slicing software is based on Orca and enables project management over a local network, while the Anycubic app provides remote monitoring. The Makeronline platform offers a model library. The ACE Pro unit is required for multicolor printing and active filament drying.

  • Printing technology: FDM
  • Build volume: 250 × 250 × 260 mm
  • Maximum print speed: up to 600 mm/s
  • Nozzle: 0.4 mm diameter
  • Maximum nozzle temperature: 300 °C
  • Heated bed: maximum temperature of 110 °C
  • Printing materials: PLA, TPU, PETG, ABS filaments
  • Extruder: single
  • Auto-leveling: LeviQ 3.0
  • Multicolor printing: with the additional ACE Pro unit
  • Display: 4.3-inch capacitive touchscreen
  • Camera: HD 720p, with timelapse function
  • Connectivity: USB, local network
  • Compatibility: Mac, PC (Windows), Anycubic Slicer Next
  • Assembly: required
  • Device dimensions: 452.9 × 504.7 × 520 mm
  • Weight: 9.37 kg
  • Package contents: printer, print head, touchscreen, spool holder, cable holder, cleaning tool, 2 M2×14 screws, 4 M3×6 screws, 2 M4×16 screws, M3×10 and M3×8 screws, 2 power cables, 4 cable organizers, signal cable, USB flash drive, 5 filament tubes, Allen key set, sample filament, nozzle cleaner, lubricant, camera mount, and instruction manual

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Type
Assembled

Type

Assembled
3D printer that requires assembly before use.
Extruder
Single

Extruder

Thread extrusion mechanism. The dual and triple extruder help with printing in multiple colors and simultaneous printing of designs.
Consumable
Filament

Consumable

Filament

Plastic filament (e.g. PLA, ABS, PETG) that is heated, melted, and deposited layer by layer to create objects in FDM 3D printers. Inexpensive, easy to use, wide variety of materials.
Compatibility
Mac, PC (Windows)
Printing Technology
FDM

Printing Technology

FDM

It is based on heating plastic filament, which is extruded from a nozzle and deposited layer by layer to form the object. It is the most widespread method for everyday use and basic prototypes.
Auto-Leveling
No

Auto-Leveling

It is a system that automatically measures the surface of the print bed and adjusts the nozzle height, so that the first layer is properly laid without manual calibration.
Camera
No

Camera

The camera in 3D printers allows remote monitoring of the printing process in real time and checking for potential issues without physical presence.
Connectivity
USB
Nozzle Temperature
300 °C
Fully Enclosed
No

Fully Enclosed

The term Fully Enclosed refers to printers with a completely sealed chamber (panels, door, lid), which traps heat and prevents drafts. It is essential for avoiding warping in "difficult" materials such as ABS and ASA, while also reducing noise and odors.
Card Reader
No
Weight
9.37 kg

Print Dimensions (Build Volume)

Width
250 mm
Length
250 mm
Height
260 mm

Printing

Maximum Print Speed
600 mm/s
Maximum Resolution
-

Dimensions

Height
520 mm
Width
452.9 mm
Length
504.7 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Anycubic Kobra 3 V2 is an FDM 3D printer with the LeviQ 3.0 auto-leveling system. Its 60 mm-wide Y-axis, SG15 bearings on the X-axis, and dual lead screws contribute to structural stability and first-layer adhesion. It offers a maximum print speed of 600 mm/s and acceleration of up to 20,000 mm/s², and supports PLA, TPU, PETG, and ABS filaments.

The nozzle features a quick-release metal connector, while its design helps prevent filament leakage. The printer features filament detection and automatic replenishment, print resumption after a power outage, and a 720p camera for monitoring, timelapse recording, and AI print error detection. It supports object skipping and area-based leveling. The Anycubic Slicer Next slicing software is based on Orca and enables project management over a local network, while the Anycubic app provides remote monitoring. The Makeronline platform offers a model library. The ACE Pro unit is required for multicolor printing and active filament drying.

  • Printing technology: FDM
  • Build volume: 250 × 250 × 260 mm
  • Maximum print speed: up to 600 mm/s
  • Nozzle: 0.4 mm diameter
  • Maximum nozzle temperature: 300 °C
  • Heated bed: maximum temperature of 110 °C
  • Printing materials: PLA, TPU, PETG, ABS filaments
  • Extruder: single
  • Auto-leveling: LeviQ 3.0
  • Multicolor printing: with the additional ACE Pro unit
  • Display: 4.3-inch capacitive touchscreen
  • Camera: HD 720p, with timelapse function
  • Connectivity: USB, local network
  • Compatibility: Mac, PC (Windows), Anycubic Slicer Next
  • Assembly: required
  • Device dimensions: 452.9 × 504.7 × 520 mm
  • Weight: 9.37 kg
  • Package contents: printer, print head, touchscreen, spool holder, cable holder, cleaning tool, 2 M2×14 screws, 4 M3×6 screws, 2 M4×16 screws, M3×10 and M3×8 screws, 2 power cables, 4 cable organizers, signal cable, USB flash drive, 5 filament tubes, Allen key set, sample filament, nozzle cleaner, lubricant, camera mount, and instruction manual

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Type
Assembled

Type

Assembled
3D printer that requires assembly before use.
Extruder
Single

Extruder

Thread extrusion mechanism. The dual and triple extruder help with printing in multiple colors and simultaneous printing of designs.
Consumable
Filament

Consumable

Filament

Plastic filament (e.g. PLA, ABS, PETG) that is heated, melted, and deposited layer by layer to create objects in FDM 3D printers. Inexpensive, easy to use, wide variety of materials.
Compatibility
Mac, PC (Windows)
Printing Technology
FDM

Printing Technology

FDM

It is based on heating plastic filament, which is extruded from a nozzle and deposited layer by layer to form the object. It is the most widespread method for everyday use and basic prototypes.
Auto-Leveling
No

Auto-Leveling

It is a system that automatically measures the surface of the print bed and adjusts the nozzle height, so that the first layer is properly laid without manual calibration.
Camera
No

Camera

The camera in 3D printers allows remote monitoring of the printing process in real time and checking for potential issues without physical presence.
Connectivity
USB
Nozzle Temperature
300 °C
Fully Enclosed
No

Fully Enclosed

The term Fully Enclosed refers to printers with a completely sealed chamber (panels, door, lid), which traps heat and prevents drafts. It is essential for avoiding warping in "difficult" materials such as ABS and ASA, while also reducing noise and odors.
Card Reader
No
Weight
9.37 kg

Print Dimensions (Build Volume)

Width
250 mm
Length
250 mm
Height
260 mm

Printing

Maximum Print Speed
600 mm/s
Maximum Resolution
-

Dimensions

Height
520 mm
Width
452.9 mm
Length
504.7 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

405,90 €
62,00 €   shipping cost
Anycubic