The Eastron SDM630 MCT three-phase energy analyzer measures electrical energy consumption and monitors the electrical parameters of the power network. It is installed on a 35 mm DIN rail and operates with 1/5 A current transformers. The built-in RS485 interface with Modbus RTU enables remote data reading and connection to energy monitoring and management systems.
The meter has a pulse output and is used in electric vehicle charging stations, photovoltaic installations, energy storage systems, smart buildings, home automation systems, and industrial, commercial, or residential installations.
- Type: Energy analyzer
- Display: Digital
- Number of phases: Three-phase
- Installation: 35 mm DIN rail
- Communication: RS485 Modbus RTU
- Outputs: Pulse
- Current transformers: 1/5 A
- Rated AC voltage: 3 × 230/400 V
- Voltage range: 100–276 V AC LN, 276 V maximum
- Rated current: 5 A
- Input current: 0.05–5(6) A, 6 A maximum
- Frequency: 50/60 Hz
- Auxiliary supply: 100–277 V AC
- Auxiliary supply current: 0.04 A
- Auxiliary supply consumption: <10 W
- Voltage accuracy: 0.5% of full scale
- Current accuracy: 0.5% of rated value
- Frequency accuracy: 0.2% of mean frequency
- Power factor accuracy: 1% of unity (0.01)
- Active power accuracy: 1% of full scale
- Reactive power accuracy: 1% of full scale
- Apparent power accuracy: 1% of full scale
- Active energy class: 1, IEC 62053-21
- Reactive energy class: 2, IEC 62053-21
- Harmonic distortion: 1% up to the 31st harmonic
- Signal response time: 1 s input step change, typically up to >99% of the final reading at 50 Hz
- AC voltage withstand: 4 kV for 1 minute
- Impulse voltage withstand: 6 kV
- Operating temperature: -40 to +70 °C
- Storage and transport temperature: -40 to +80 °C
- Reference temperature: 23 ± 2 °C
- Relative humidity: 0–95%, non-condensing
- Installation category: CAT III
- Installation altitude: Up to 2000 m above sea level
- Protection class: II
- Operating environment: Dry
- Warm-up time: 3 s
- Mechanical environment: M1
- Electromagnetic environment: E2
- Pollution degree: 2
- Dimensions: 72 × 94.5 × 65 mm (W × H × D)
- Enclosure protection rating: IP51, for indoor use
- Material: Self-extinguishing, in accordance with UL94 V-0
Specifications
- Type
- Energy Analyzer
- Display Type
- Digital
- Installation Type
- Rail
- Number of Phases
- Three-phase
- Maximum Current
- -
Smart Features
- Connectivity
- Modbus
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.