Kraft FixoTile Gel resin-modified cementitious tile adhesive uses GEL technology with water-swellable copolymers. Activated by water, these help the adhesive fully wet the tile and maintain volume stability during installation. It is suitable for absorbent and non-absorbent tiles, including granite, natural stone, porcelain tiles, clinker and ceramic tiles, on floors and walls, as well as for underfloor heating applications.
The adhesive offers high thixotropy, zero vertical slip and extended open time. It can be applied indoors and outdoors at a thickness of up to 20 mm and is suitable for tiles up to 150 × 300 cm. Double-buttering is recommended for large tiles with an area greater than 900 cm² and is essential for extra-large tiles.
- Type: Tile adhesive
- Technology: GEL
- Classification: C2TE according to EN 12004
- Colour: White
- Quantity: 25 kg
- Vertical slip: Zero
- Open time: At least 30 minutes under normal conditions
- Application thickness: Up to 20 mm
- Maximum tile size: 150 × 300 cm
- Consumption: 3–4 kg/m²
- Mixing ratio: 7.0 l of water per 25 kg of adhesive
- Grouting on walls: After 4–8 hours
- Grouting on floors: After 24 hours
- Volatile organic compound emissions: Extremely low; EMICODE EC1PLUS certified
- Use: Indoor and outdoor
- Application: Floors and walls
- Suitable for: Absorbent and non-absorbent tiles
Manufacturer
OEM- Type
- Tiles
- Quantity
- 25 kg
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.