Network Cables

A-LAN U/UTP Cat.5e Ethernet Network Cable Gray

The A-LAN U/UTP Cat.5e network cable is designed for professional telecommunications network installations and CCTV systems. It features four twisted pairs of solid copper conductors, a 4x2x24 AWG...

The A-LAN U/UTP Cat.5e network cable is designed for professional telecommunications network installations and CCTV systems. It features four twisted pairs of solid copper conductors, a 4x2x24 AWG cross-section and an unshielded core. It supports Gigabit Ethernet 1000BASE-T with transmission speeds of up to 1000 Mbps.

The LSOH (Low Smoke Zero Halogen) jacket...

See full description See full description
258 21 €
Delivery Fri, 27 Nov - Thu, 03 Dec
14,00 €   shipping cost
Sent from Greece
From Getters 4.6 (117)
Greece
20+ pieces
See PC Cables on the page of Getters

Learn more about invoicing

Description

Description

The A-LAN U/UTP Cat.5e network cable is designed for professional telecommunications network installations and CCTV systems. It features four twisted pairs of solid copper conductors, a 4x2x24 AWG cross-section and an unshielded core. It supports Gigabit Ethernet 1000BASE-T with transmission speeds of up to 1000 Mbps.

The LSOH (Low Smoke Zero Halogen) jacket and Euroclass Dca classification relate to reduced smoke emissions and the absence of halogens. The cable is suitable for indoor horizontal and vertical LAN, WAN and CCTV installations, with a recommended maximum installation run of 90 m.

  • Type: U/UTP
  • Category: Cat.5e
  • Class: D
  • Colour: Grey
  • Conductors: Solid copper
  • Conductor diameter: 0.51 mm
  • Cross-section: 4x2x24 AWG
  • Core: 4 twisted pairs
  • Shielding: Unshielded
  • Insulation: Polyethylene
  • Jacket: LSOH (Low Smoke Zero Halogen)
  • CPR classification: Euroclass Dca
  • Transmission speed: Up to 1000 Mbps
  • Ethernet: Gigabit Ethernet 1000BASE-T
  • PoE: IEEE 802.3at
  • Standards: ISO/IEC 11801, ANSI/TIA-568
  • Testing: INTERTEK laboratories and the Warsaw Institute of Telecommunications
  • Maximum recommended installation run: 90 m
  • DC loop resistance: ≤ 95 Ω/km
  • Resistance variation: ≤ 2%
  • Insulation resistance at 500 V: ≥ 5000 MΩ *km
  • Capacitive reactance at 800 Hz: Nominally 48 nF/km
  • Capacitive reactance variation: ≤ 1500 pF/km
  • Characteristic impedance (1–1000 MHz): (100 ± 15) Ω
  • NVP: 69%
  • Nominal propagation delay: ≤ 535 ns/100 m
  • Nominal delay skew: ≤ 20 ns/100 m
  • Maximum pulling force: 80 N
  • Operating temperature: -30 °C to +50 °C
  • Installation temperature: 0 °C to +50 °C
  • Outer diameter: 4.8 mm
  • Weight: 30 kg/km
  • Packaging: 305 m cardboard box

Manufacturer

See full description

Specifications

Specifications

Type
U/UTP
Category
Cat.5e
Outdoor
No
Colour
Grey
Terminated
Yes
Flat
No
Fiber Optic Connectors
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The A-LAN U/UTP Cat.5e network cable is designed for professional telecommunications network installations and CCTV systems. It features four twisted pairs of solid copper conductors, a 4x2x24 AWG cross-section and an unshielded core. It supports Gigabit Ethernet 1000BASE-T with transmission speeds of up to 1000 Mbps.

The LSOH (Low Smoke Zero Halogen) jacket and Euroclass Dca classification relate to reduced smoke emissions and the absence of halogens. The cable is suitable for indoor horizontal and vertical LAN, WAN and CCTV installations, with a recommended maximum installation run of 90 m.

  • Type: U/UTP
  • Category: Cat.5e
  • Class: D
  • Colour: Grey
  • Conductors: Solid copper
  • Conductor diameter: 0.51 mm
  • Cross-section: 4x2x24 AWG
  • Core: 4 twisted pairs
  • Shielding: Unshielded
  • Insulation: Polyethylene
  • Jacket: LSOH (Low Smoke Zero Halogen)
  • CPR classification: Euroclass Dca
  • Transmission speed: Up to 1000 Mbps
  • Ethernet: Gigabit Ethernet 1000BASE-T
  • PoE: IEEE 802.3at
  • Standards: ISO/IEC 11801, ANSI/TIA-568
  • Testing: INTERTEK laboratories and the Warsaw Institute of Telecommunications
  • Maximum recommended installation run: 90 m
  • DC loop resistance: ≤ 95 Ω/km
  • Resistance variation: ≤ 2%
  • Insulation resistance at 500 V: ≥ 5000 MΩ *km
  • Capacitive reactance at 800 Hz: Nominally 48 nF/km
  • Capacitive reactance variation: ≤ 1500 pF/km
  • Characteristic impedance (1–1000 MHz): (100 ± 15) Ω
  • NVP: 69%
  • Nominal propagation delay: ≤ 535 ns/100 m
  • Nominal delay skew: ≤ 20 ns/100 m
  • Maximum pulling force: 80 N
  • Operating temperature: -30 °C to +50 °C
  • Installation temperature: 0 °C to +50 °C
  • Outer diameter: 4.8 mm
  • Weight: 30 kg/km
  • Packaging: 305 m cardboard box

Manufacturer

Type
U/UTP
Category
Cat.5e
Outdoor
No
Colour
Grey
Terminated
Yes
Flat
No
Fiber Optic Connectors
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

258,21 €
14,00 €   shipping cost