Skroutz.mt

Bosch GBH 185-LI Demolition Hammer Battery 18V Solo with Chuck SDS Plus 0611924020
Rotary Hammers

Bosch GBH 185-LI Demolition Hammer Battery 18V Solo with Chuck SDS Plus 0611924020

Key features:

  • Power supply: battery
  • Voltage: 18V
  • Impact energy: 1.9 J
  • Maximum impact rate: 4675 bpm
  • Maximum motor speed: 1050 rpm
See full description
  • Item Excavator

  • Impact Energy

    The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

    2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.

    1.9

    For casual amateur use, 2 to 4 Joules are considered sufficient.

  • Socket

    SDS - SDS Plus (TE-C)

    SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.

  • Maximum Number of Impacts

    The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

    2.

    Note that the Impact Energy is also important for performance, indicating the force of each strike.

  • Volt

    The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

    2. Impact energy is another characteristic that shows the "strength" of the tool.

    18

    Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.
  • See all
Review the product
Product report

Description

Description

Capabilities

  • Better drilling experience thanks to Vibration Control, which absorbs shocks
  • Increased safety from accidental jams thanks to Reverse Motion Control (KickBack Control)
  • Continuous performance thanks to the constant speed motor

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Power Source
Battery
Type
Excavator

Battery Specifications

Number of Batteries
0
Volt
18 V

Volt: 18

The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

2. Impact energy is another characteristic that shows the "strength" of the tool.


Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.
Lithium
No

Features

Maximum Motor Speed
1050 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
1.9 Joule

Impact Energy: 1.9

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
4675 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
No
Pneumatic
No
Speed Adjustable
No
Impact
No
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Handle included
Yes
Integrated Light
No
Guide
No
Net Weight
2300 gr
Weight (with Battery)
2300 gr

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Capabilities

  • Better drilling experience thanks to Vibration Control, which absorbs shocks
  • Increased safety from accidental jams thanks to Reverse Motion Control (KickBack Control)
  • Continuous performance thanks to the constant speed motor

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Power Source
Battery
Type
Excavator

Battery Specifications

Number of Batteries
0
Volt
18 V

Volt: 18

The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

2. Impact energy is another characteristic that shows the "strength" of the tool.


Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.
Lithium
No

Features

Maximum Motor Speed
1050 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
1.9 Joule

Impact Energy: 1.9

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
4675 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
No
Pneumatic
No
Speed Adjustable
No
Impact
No
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Handle included
Yes
Integrated Light
No
Guide
No
Net Weight
2300 gr
Weight (with Battery)
2300 gr

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

250,55 €
14,00 €   shipping cost