Skroutz.mt

Vevor Plasma Cutting Inverter 65A
Welding Machines

Vevor Plasma Cutting Inverter 65A

The Vevor plasma cutter uses Non-Touch Pilot Arc technology for cutting without direct contact with the metal. IGBT inverter technology supports cutting current up to 65 A, while overheat and...

The Vevor plasma cutter uses Non-Touch Pilot Arc technology for cutting without direct contact with the metal. IGBT inverter technology supports cutting current up to 65 A, while overheat and overcurrent protection helps ensure safe operation.

The adjustable PT time can be set from 1 to 6 seconds to extend the service life of consumables. The 2T and 4T modes...

See full description See full description

Top specs

  • Welding Current

    65

    Suitable for use on thin sheets and DIY constructions.
  • See all
402 87 €
Delivery Thu, 26 Nov - Wed, 02 Dec
29,00 €   shipping cost
Sent from Greece
From Vevor Hellas
Greece
See Tools on the page of Vevor Hellas

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Vevor plasma cutter uses Non-Touch Pilot Arc technology for cutting without direct contact with the metal. IGBT inverter technology supports cutting current up to 65 A, while overheat and overcurrent protection helps ensure safe operation.

The adjustable PT time can be set from 1 to 6 seconds to extend the service life of consumables. The 2T and 4T modes allow semi-automatic cutting for smaller jobs or automatic cutting for extended operation, while the digital display makes it easy to adjust settings and monitor operation.

  • Type: Inverter plasma cutter
  • Maximum cutting current: 65 A
  • Arc technology: Non-Touch Pilot Arc
  • Maximum cutting thickness: 20 mm
  • Clean-cut thickness: up to 16 mm
  • Protection: Overheat and overcurrent protection
  • PT time: Adjustable from 1 to 6 seconds
  • Modes: 2T and 4T
  • Display: Digital
  • Weight: 8.7 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
65 A

Welding Current (max): 65


Suitable for use on thin sheets and DIY constructions.
Weight
8700 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Vevor plasma cutter uses Non-Touch Pilot Arc technology for cutting without direct contact with the metal. IGBT inverter technology supports cutting current up to 65 A, while overheat and overcurrent protection helps ensure safe operation.

The adjustable PT time can be set from 1 to 6 seconds to extend the service life of consumables. The 2T and 4T modes allow semi-automatic cutting for smaller jobs or automatic cutting for extended operation, while the digital display makes it easy to adjust settings and monitor operation.

  • Type: Inverter plasma cutter
  • Maximum cutting current: 65 A
  • Arc technology: Non-Touch Pilot Arc
  • Maximum cutting thickness: 20 mm
  • Clean-cut thickness: up to 16 mm
  • Protection: Overheat and overcurrent protection
  • PT time: Adjustable from 1 to 6 seconds
  • Modes: 2T and 4T
  • Display: Digital
  • Weight: 8.7 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
65 A

Welding Current (max): 65


Suitable for use on thin sheets and DIY constructions.
Weight
8700 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

402,87 €
29,00 €   shipping cost