Skroutz.mt

Solo Battery Powered Multi-Sander 18V with Speed Control and with Suction System 04-623
Sanders

Solo Battery Powered Multi-Sander 18V with Speed Control and with Suction System 04-623

The Neo Tools 04-623 multi-sander is powered by an 18 V battery and supports sanding, polishing and smoothing. The variable speed range is 7,000–12,000 rpm, while the dust extraction system includes a...

The Neo Tools 04-623 multi-sander is powered by an 18 V battery and supports sanding, polishing and smoothing. The variable speed range is 7,000–12,000 rpm, while the dust extraction system includes a collection container.

The three interchangeable work bases include square, rectangular and delta bases. The package also includes three sheets of sandpaper.

  • ...
See full description See full description

Top specs

  • Number of Batteries 0

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    1.6

    Very fine sanding, sensitive materials, finishing.

  • Oscillations

    • High number of strokes → more intense and faster sanding
    • Low number → gentler, suitable for sensitive surfaces

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • See all
73 90 €
Delivery Thu, 12 Nov - Wed, 18 Nov
14,00 €   shipping cost
Sent from Greece
From Getters 4.6 (112)
4.6 (112 reviews)
Greece
20+ pieces
See Power Tools on the page of Getters

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Neo Tools 04-623 multi-sander is powered by an 18 V battery and supports sanding, polishing and smoothing. The variable speed range is 7,000–12,000 rpm, while the dust extraction system includes a collection container.

The three interchangeable work bases include square, rectangular and delta bases. The package also includes three sheets of sandpaper.

  • Power source: Battery
  • Voltage: 18 V
  • Variable speed: Yes
  • Speed: 7,000–12,000 rpm
  • Orbits per minute: 24,000 opm
  • Oscillation diameter: 1.6 mm
  • Sound power level: 86 dB
  • Dust extraction system: With collection container
  • Functions: Sanding, polishing and smoothing
  • Work bases: Square 111 x 111 mm, rectangular 128 x 78 mm and delta 147 x 147 x 100 mm
  • Protection: Against overload and low voltage
  • Package contents: Dust container, 3 sheets of sandpaper, square base, rectangular base and delta base

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Multi-Sander

Type

Multi-Sander
For smoothing all surfaces with alternating sanding bases.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Oscillation Range
1.6 mm

Oscillation Range: 1.6

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
0
Volt
18 V

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
86 dB
Pulses
24000 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Neo Tools 04-623 multi-sander is powered by an 18 V battery and supports sanding, polishing and smoothing. The variable speed range is 7,000–12,000 rpm, while the dust extraction system includes a collection container.

The three interchangeable work bases include square, rectangular and delta bases. The package also includes three sheets of sandpaper.

  • Power source: Battery
  • Voltage: 18 V
  • Variable speed: Yes
  • Speed: 7,000–12,000 rpm
  • Orbits per minute: 24,000 opm
  • Oscillation diameter: 1.6 mm
  • Sound power level: 86 dB
  • Dust extraction system: With collection container
  • Functions: Sanding, polishing and smoothing
  • Work bases: Square 111 x 111 mm, rectangular 128 x 78 mm and delta 147 x 147 x 100 mm
  • Protection: Against overload and low voltage
  • Package contents: Dust container, 3 sheets of sandpaper, square base, rectangular base and delta base

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Multi-Sander

Type

Multi-Sander
For smoothing all surfaces with alternating sanding bases.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Oscillation Range
1.6 mm

Oscillation Range: 1.6

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
0
Volt
18 V

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
86 dB
Pulses
24000 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

73,90 €
14,00 €   shipping cost
Neo Tools