Surface Preparation

• The surface to be painted must be cleaned from dust, grease, oils, peeling old paints, rust, mold or moisture residues for proper adhesion of the product.
• On new or porous surfaces, first apply the corresponding recommended primer of the product (Life dur, Life dur water).
• Apply the product in 2 coats, which should be spaced 1 – 2 hours apart, after thoroughly stirring it.

Thinning

• First coat: 15% water.
• Second coat: 5-10% water.

Application Conditions

• Avoid applying the product at temperatures below 6°C and above 40°C, as well as when the relative humidity is higher than 80%.
• Adverse conditions during application can alter the final properties of the paint.

Application Tools

• Brush
• Roller
• Spray gun

During work, keep the tools “wet” inside the container or the product’s receptacle. Drain the tools well back into the container and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not empty washing liquids into the groundwater.

Warning: Wear protective gloves, protective clothing, and personal protection equipment for eyes and face. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are worn and easy to remove, take them out. Continue rinsing.