Skroutz.mt

Pull-In MX Master Motorcycle Helmet Motocross ECE 22.06 1310gr
Motorcycle Helmets

Pull-In MX Master Motorcycle Helmet Motocross ECE 22.06 1310gr Code: 265-9002201-0006

This motocross helmet is designed for extreme driving enthusiasts and is ideal for motocross or enduro races. It features a long chin guard and a large visor that protect from the sun and branches,...

This motocross helmet is designed for extreme driving enthusiasts and is ideal for motocross or enduro races. It features a long chin guard and a large visor that protect from the sun and branches, thus offering comfort and safety. It is lightweight, making it suitable for long routes on dirt surfaces, while it is not recommended for use in urban areas or...

See full description See full description

  • Type

    Motocross

    Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

    They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • See all

Size

Size

International
Review the product
Product report

Description

Description

This motocross helmet is designed for extreme driving enthusiasts and is ideal for motocross or enduro races. It features a long chin guard and a large visor that protect from the sun and branches, thus offering comfort and safety. It is lightweight, making it suitable for long routes on dirt surfaces, while it is not recommended for use in urban areas or highways.

Its thermoplastic construction ensures basic protection and an affordable price. However, the helmet does not support the Pinlock system, so there is no option to add an anti-fog film. The interior of the helmet is removable and washable, making maintenance easier.

Your safety is a priority, that’s why this helmet is certified with ECE 22.06, confirming that it meets modern safety standards. The double D-ring buckle ensures a good fit without coming undone, though it needs a few seconds to fasten.

  • Type: Motocross
  • Color: Orange
  • Material: Thermoplastic
  • Removable / Washable Interior: Yes
  • Buckle: Double D Ring
  • Certification: ECE 22.06
  • Bluetooth: Without Bluetooth

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
265-9002201-0006

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Weight (+/-50 gr)
1310 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Orange
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

This motocross helmet is designed for extreme driving enthusiasts and is ideal for motocross or enduro races. It features a long chin guard and a large visor that protect from the sun and branches, thus offering comfort and safety. It is lightweight, making it suitable for long routes on dirt surfaces, while it is not recommended for use in urban areas or highways.

Its thermoplastic construction ensures basic protection and an affordable price. However, the helmet does not support the Pinlock system, so there is no option to add an anti-fog film. The interior of the helmet is removable and washable, making maintenance easier.

Your safety is a priority, that’s why this helmet is certified with ECE 22.06, confirming that it meets modern safety standards. The double D-ring buckle ensures a good fit without coming undone, though it needs a few seconds to fasten.

  • Type: Motocross
  • Color: Orange
  • Material: Thermoplastic
  • Removable / Washable Interior: Yes
  • Buckle: Double D Ring
  • Certification: ECE 22.06
  • Bluetooth: Without Bluetooth

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
265-9002201-0006

Dimensions

Type
Motocross

Type

Motocross

Motocross helmets are specially designed for extreme off-road riding for motocross or enduro races. They have a very long chin and a large visor for protection from the sun or branches.

They are usually lighter compared to full-face or flip-up helmets to be comfortable for the rider. They are not recommended for riding in the city or on highways.
Weight (+/-50 gr)
1310 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Orange
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Double D Ring

Clasp

Double D Ring

The helmet is fastened with 2 metal rings that the strap passes through between them. 2. It is a mechanism that securely holds the helmet without coming undone. 3. It is not recommended for use with helmets that frequently come off as the fastening requires time. It does not easily break or malfunction compared to the microlock fastening.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

129,95 €
17,00 €   shipping cost