Creality PETG 3D printing filament has a consistent diameter and is moisture-resistant. Printed models are flexible and can withstand repeated bending. PETG is weather- and chemical-resistant, and the...
Creality PETG 3D printing filament has a consistent diameter and is moisture-resistant. Printed models are flexible and can withstand repeated bending. PETG is weather- and chemical-resistant, and the filament is odorless and non-toxic.
Creality PETG 3D printing filament has a consistent diameter and is moisture-resistant. Printed models are flexible and can withstand repeated bending. PETG is weather- and chemical-resistant, and the filament is odorless and non-toxic.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
The overall impression is very positive: users mainly praise the good print quality and affordable price. They also mention that it works easily with various printers and that the PETG is durable. However, some users experience stringing or moisture-related issues that require drying and careful settings, while the gloss and shade may differ from expectations.
It needs some attention with the flow, speed, and temperature settings on the nozzle and the hotbed.
But generally, it is a cheap and easy-to-use filament
Θέλει κάποια προσοχή με τις ρυθμισεις ροής, ταχύτητας και θερμοκρασίας στο nozzle και το hotbed.
Αλλά γενικά είναι ένα φθηνό και κόλο fillament
Affordable and -so far- durable.
It isn't beige, but transparent.
Glue was applied to the plate, and there was no problem with the prints. Also, because I used it up in about 10 days, with temperatures above 30°C, everything went well.
Οικονομικό και -μέχρι στιγμής- ανθεκτικό.
Μπεζ δεν είναι, αλλά διάφανο.
Στο plate έγινε εφαρμογή κόλλας, και δεν υπήρχε πρόβλημα στις εκτυπώσεις. Επιπλέον επειδή το κατανάλωσα σε περίπου 10 ημέρες, με θερμοκρασίες πάνω από 30°C, όλα πήγαν καλά.
Very cheap as a material, Creality's PETG, but you definitely need a dryer to work with it. Before I bought the dryer, I had various issues mainly clogs and appearance problems due to the moisture inside the material. From the moment it goes into the dryer, after a few hours all the problems are solved. I have stopped using PLA, I like that PETG is not so brittle and it withstands bending and temperatures better. Again, according to its price (around €8 per kilo) it seems perfect! For the tough jobs, there is also ASA or ABS with their own issues...
πολύ φθηνό σαν υλικό το petg της creality, αλλά χρειάζεται απαραίτητα dryer για να το δουλέψεις. Πριν αγοράσω τον dryer, είχα διαφορά θέματα κυρίως clogs και εμφάνισης λόγω της υγρασίας εντός του υλικού. Από τη στιγμή που μπαίνει στον dryer, μετά από λίγες ώρες λύνονται όλα τα προβλήματα. Έχω σταματήσει να χρησιμοποιώ PLA, μου αρέσει που το PTEG δεν είναι τόσο εύθραυστο και αντέχει σε κάμψη και θερμοκρασίες καλύτερα. Και πάλι σύμφωνα με την τιμή του (γύρω στα 8€ ανα κιλό) μοιάζει τέλειο! για τα δύσκολα υπάρχει και το ASA ή το ABS με τα δικά τους θέματα...
Quite good for its price. A bit more elasticity than I expected and was used to, but OK. Quite a bit of stringing but expected for PETG.
Αρκετά καλό για την τιμή του. Λίγο μεγαλύτερη ελαστικότητα από αυτό που περίμενα και είχα συνηθήσει αλλά ΟΚ. Αρκετό stringing αλλά αναμενόμενο για PETG.
Good price and good print quality. But if used with Bambu Labs AMS, small pieces start to get stuck in the feeding gears until it creates a problem.
Better to use as an external spool.
Καλή τιμή και καλή ποιότητα εκτύπωσης. Αλλά αν χρησιμοποιηθεί με Bambu Labs AMS μικρά κομματάκια αρχίζουν να μένουν στα feeding γρανάζια μέχρι που θα δημιουργήσει πρόβλημα.
Economical PETG with some compromises in quality. Extremely, extremely high stringing. Considerably lower density compared to other filaments. In general, prefer something else like Devil Design or Prusament if price is not your absolute criterion. It's probably not a coincidence that it costs half as much as other brands.
Of course, it will satisfy the average user.
Οικονομικό PETG με κάποιες εκπτώσεις στην ποιότητα. Πάρα μα πάρα πολύ stringing. Αρκετά μικρότερο density σε σχέση με άλλα filaments. Γενικά προτιμήστε κάτι άλλο όπως τα Devil Design ή τα Prusament αν το οικονομικό σκέλος δεν είναι το απόλυτο κριτήριο σας. Μάλλον δεν είναι και τυχαίο που έχει την μισή τιμή από άλλες μάρκες.
I didn't really like the navy blue color, and generally it has stringing, but okay it's PETG and I don't pay attention to it regarding moisture, so it might be my fault. The color is the biggest downside for me. It's not exactly as dark as it is in the photo.
Δε μου άρεσε πολύ το navy blue χρώμα, και γενικά κάνει stringing, αλλά εντάξει είναι PETG και δεν το προσέχω όσον αφορά στην υγρασία, γι' αυτό μπορεί να φταίω εγώ. Το χρώμα είναι το μεγαλύτερο μείον για 'μένα. Δεν είναι ακριβώς όσο σκούρο είναι στη φωτογραφία.
I don't understand all the five-star reviews at all. I have tried different temperatures, flow rates, printing speeds, cooling fan speeds, I have tried for many hours to dry it, nothing. The prints come out with visible horizontal "stripes," layers where there has been under-extrusion while in other places it has gathered material as if there was over-extrusion. Initially, I thought it was my printer's fault, so I ran some prints with PLA+ and an old clear PETG from another company and I didn't have any of the above problems, so it's not a problem with my printer. It might be possible to adjust it and print as easily with PLA as some say, but for now, I haven't managed to do it myself. Elegoo Neptune 4 Plus, slicing with CURA 5.8.1, so far better quality with flow 100, nozzle 245, speed 130mms, hotbed 70C.
Δεν καταλαβαίνω καθόλου όλες τις πεντάστερες κριτικές. Έχω δοκιμάσει διαφορετικές θερμοκρασίες, flow rate, ταχύτητες εκτύπωσης, ταχύτητες ανεμιστήρα ψύξης, έχω προσπαθήσει επί πολλές ώρες να το στεγνώσω, τίποτα. Τα print βγαίνουν με εμφανείς "ρίγες" οριζόντια, στρώματα όπου έχει γίνει under-extrusion ενώ σε άλλα μέρη έχει έχει μαζέψει υλικό σαν να έγινε over-extrusion. Αρχικά θεώρησα ότι φταίει ο εκτυπωτής μου, οπότε έτρεξα μερικά print με PLA+ και ένα παλιό clear PETG άλλης εταιρίας και δεν είχα κανένα από τα παραπάνω προβλήματα, άρα δεν είναι πρόβλημα του εκτυπωτή μου. Πιθανώς να μπορεί να γίνει ρύθμιση και να μπορεί να τυπώνει με την ίδια ευκολία με PLA όπως λένε κάποιοι, αλλά προς στιγμήν, δεν το έχω καταφέρει εγώ. Elegoo Neptune 4 Plus, Slicing με CURA 5.8.1, μέχρι στιγμής καλύτερη ποιότητα με flow 100, nozzle 245, speed 130mms, hotbed 70C.
It needs some attention with the flow, speed, and temperature settings on the nozzle and the hotbed.
But generally, it is a cheap and easy-to-use filament
Θέλει κάποια προσοχή με τις ρυθμισεις ροής, ταχύτητας και θερμοκρασίας στο nozzle και το hotbed.
Αλλά γενικά είναι ένα φθηνό και κόλο fillament
Creality PETG 3D printing filament has a consistent diameter and is moisture-resistant. Printed models are flexible and can withstand repeated bending. PETG is weather- and chemical-resistant, and the filament is odorless and non-toxic.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
The overall impression is very positive: users mainly praise the good print quality and affordable price. They also mention that it works easily with various printers and that the PETG is durable. However, some users experience stringing or moisture-related issues that require drying and careful settings, while the gloss and shade may differ from expectations.
It needs some attention with the flow, speed, and temperature settings on the nozzle and the hotbed.
But generally, it is a cheap and easy-to-use filament
Θέλει κάποια προσοχή με τις ρυθμισεις ροής, ταχύτητας και θερμοκρασίας στο nozzle και το hotbed.
Αλλά γενικά είναι ένα φθηνό και κόλο fillament
Affordable and -so far- durable.
It isn't beige, but transparent.
Glue was applied to the plate, and there was no problem with the prints. Also, because I used it up in about 10 days, with temperatures above 30°C, everything went well.
Οικονομικό και -μέχρι στιγμής- ανθεκτικό.
Μπεζ δεν είναι, αλλά διάφανο.
Στο plate έγινε εφαρμογή κόλλας, και δεν υπήρχε πρόβλημα στις εκτυπώσεις. Επιπλέον επειδή το κατανάλωσα σε περίπου 10 ημέρες, με θερμοκρασίες πάνω από 30°C, όλα πήγαν καλά.
Very cheap as a material, Creality's PETG, but you definitely need a dryer to work with it. Before I bought the dryer, I had various issues mainly clogs and appearance problems due to the moisture inside the material. From the moment it goes into the dryer, after a few hours all the problems are solved. I have stopped using PLA, I like that PETG is not so brittle and it withstands bending and temperatures better. Again, according to its price (around €8 per kilo) it seems perfect! For the tough jobs, there is also ASA or ABS with their own issues...
πολύ φθηνό σαν υλικό το petg της creality, αλλά χρειάζεται απαραίτητα dryer για να το δουλέψεις. Πριν αγοράσω τον dryer, είχα διαφορά θέματα κυρίως clogs και εμφάνισης λόγω της υγρασίας εντός του υλικού. Από τη στιγμή που μπαίνει στον dryer, μετά από λίγες ώρες λύνονται όλα τα προβλήματα. Έχω σταματήσει να χρησιμοποιώ PLA, μου αρέσει που το PTEG δεν είναι τόσο εύθραυστο και αντέχει σε κάμψη και θερμοκρασίες καλύτερα. Και πάλι σύμφωνα με την τιμή του (γύρω στα 8€ ανα κιλό) μοιάζει τέλειο! για τα δύσκολα υπάρχει και το ASA ή το ABS με τα δικά τους θέματα...
Quite good for its price. A bit more elasticity than I expected and was used to, but OK. Quite a bit of stringing but expected for PETG.
Αρκετά καλό για την τιμή του. Λίγο μεγαλύτερη ελαστικότητα από αυτό που περίμενα και είχα συνηθήσει αλλά ΟΚ. Αρκετό stringing αλλά αναμενόμενο για PETG.
Good price and good print quality. But if used with Bambu Labs AMS, small pieces start to get stuck in the feeding gears until it creates a problem.
Better to use as an external spool.
Καλή τιμή και καλή ποιότητα εκτύπωσης. Αλλά αν χρησιμοποιηθεί με Bambu Labs AMS μικρά κομματάκια αρχίζουν να μένουν στα feeding γρανάζια μέχρι που θα δημιουργήσει πρόβλημα.
Economical PETG with some compromises in quality. Extremely, extremely high stringing. Considerably lower density compared to other filaments. In general, prefer something else like Devil Design or Prusament if price is not your absolute criterion. It's probably not a coincidence that it costs half as much as other brands.
Of course, it will satisfy the average user.
Οικονομικό PETG με κάποιες εκπτώσεις στην ποιότητα. Πάρα μα πάρα πολύ stringing. Αρκετά μικρότερο density σε σχέση με άλλα filaments. Γενικά προτιμήστε κάτι άλλο όπως τα Devil Design ή τα Prusament αν το οικονομικό σκέλος δεν είναι το απόλυτο κριτήριο σας. Μάλλον δεν είναι και τυχαίο που έχει την μισή τιμή από άλλες μάρκες.
I didn't really like the navy blue color, and generally it has stringing, but okay it's PETG and I don't pay attention to it regarding moisture, so it might be my fault. The color is the biggest downside for me. It's not exactly as dark as it is in the photo.
Δε μου άρεσε πολύ το navy blue χρώμα, και γενικά κάνει stringing, αλλά εντάξει είναι PETG και δεν το προσέχω όσον αφορά στην υγρασία, γι' αυτό μπορεί να φταίω εγώ. Το χρώμα είναι το μεγαλύτερο μείον για 'μένα. Δεν είναι ακριβώς όσο σκούρο είναι στη φωτογραφία.
I don't understand all the five-star reviews at all. I have tried different temperatures, flow rates, printing speeds, cooling fan speeds, I have tried for many hours to dry it, nothing. The prints come out with visible horizontal "stripes," layers where there has been under-extrusion while in other places it has gathered material as if there was over-extrusion. Initially, I thought it was my printer's fault, so I ran some prints with PLA+ and an old clear PETG from another company and I didn't have any of the above problems, so it's not a problem with my printer. It might be possible to adjust it and print as easily with PLA as some say, but for now, I haven't managed to do it myself. Elegoo Neptune 4 Plus, slicing with CURA 5.8.1, so far better quality with flow 100, nozzle 245, speed 130mms, hotbed 70C.
Δεν καταλαβαίνω καθόλου όλες τις πεντάστερες κριτικές. Έχω δοκιμάσει διαφορετικές θερμοκρασίες, flow rate, ταχύτητες εκτύπωσης, ταχύτητες ανεμιστήρα ψύξης, έχω προσπαθήσει επί πολλές ώρες να το στεγνώσω, τίποτα. Τα print βγαίνουν με εμφανείς "ρίγες" οριζόντια, στρώματα όπου έχει γίνει under-extrusion ενώ σε άλλα μέρη έχει έχει μαζέψει υλικό σαν να έγινε over-extrusion. Αρχικά θεώρησα ότι φταίει ο εκτυπωτής μου, οπότε έτρεξα μερικά print με PLA+ και ένα παλιό clear PETG άλλης εταιρίας και δεν είχα κανένα από τα παραπάνω προβλήματα, άρα δεν είναι πρόβλημα του εκτυπωτή μου. Πιθανώς να μπορεί να γίνει ρύθμιση και να μπορεί να τυπώνει με την ίδια ευκολία με PLA όπως λένε κάποιοι, αλλά προς στιγμήν, δεν το έχω καταφέρει εγώ. Elegoo Neptune 4 Plus, Slicing με CURA 5.8.1, μέχρι στιγμής καλύτερη ποιότητα με flow 100, nozzle 245, speed 130mms, hotbed 70C.
It needs some attention with the flow, speed, and temperature settings on the nozzle and the hotbed.
But generally, it is a cheap and easy-to-use filament
Θέλει κάποια προσοχή με τις ρυθμισεις ροής, ταχύτητας και θερμοκρασίας στο nozzle και το hotbed.
Αλλά γενικά είναι ένα φθηνό και κόλο fillament