The FNIRSI FDM01 sound level meter measures noise in a range of 30–130 dB and simultaneously monitors temperature and humidity. It uses a 6 mm condenser microphone and A-weighting, with fast and slow measurement modes. Readings can be displayed as minimum, average or maximum values, while HOLD keeps the reading on the screen.
The 2.3-inch color VA display has a backlight, and a red flashing alarm indicates when the sound level limit is exceeded. The housing is made of ABS, the buttons are silicone, and the windscreen design helps reduce the effect of ambient noise on measurements. The rechargeable battery is charged via USB-C.
- Measurement range: 30–130 dB
- Accuracy: ±1.5 dB (with a 94 dB @ 1 kHz NV sound source)
- Frequency range: 31.5 Hz–8.5 kHz
- Frequency weighting: A-weighting
- Microphone: Condenser, 6 mm
- Measurement modes: FAST (1 sec) and SLOW (1.25 sec)
- Measurement readings: MIN, AVG and MAX
- Reading hold: HOLD
- Over-range indication: OVER or UNDER symbols
- Display: Color VA, 2.3 inches, 4 digits, 0.1 dB resolution, backlit
- Reading rate: 2 times/sec
- Display dynamic scale: 1 division = 2 dB
- Monitoring: Temperature and humidity
- Operating temperature: 0°C–40°C
- Operating humidity: 10%–80% RH
- Storage temperature: -10°C–60°C
- Storage humidity: 10%–70% RH
- Housing material: ABS
- Button material: Silicone
- Battery: Rechargeable lithium, 600 mAh / 3.7 V
- Charging port: USB-C
- Package contents: Sound level meter, charging cable
- Range
- 30-130 dB
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.