Bioethanol Fireplace 60cm with Open Side.

The bioenergy fireplace features full (high) glass panels. The construction of the bioethanol fireplace is made of matte black steel, and the glass is transparent, thermally compressed, 4mm thick.

The bioethanol fireplace is designed to be installed into a prepared wall opening. The fireplace is fully covered with glass, so it is not possible to access the fire, although the glass will heat up. The side window opens, allowing the addition of liquid, ignition, or extinguishing the fire. The fireplace must be placed in a prepared opening, and the construction can be made from fire-resistant plasterboard.

The bioethanol fireplace should not be connected to an external chimney (like a traditional fireplace). Two ventilation grilles (not included) should be installed in the structure where the bioethanol fireplace is placed. The first ventilation grille should be located below the fireplace and the second above it.

There are ventilation openings inside the fireplace, behind the ethanol burner. These openings draw oxygen from the lower ventilation grille, so the connection should not be blocked (there should be an open space within the structure, below the fireplace). There must also be an open space above the structure of the bioenergy fireplace to allow airflow from the upper chimney (in the bioenergy fireplace) to the upper ventilation grille. All ventilation openings in the fireplace must be free.

Ventilation grilles should be installed on the front face of the wall, or corner grilles may be used. The ventilation grilles should ideally have the same width as the fireplace.

Decorations should not be placed on the burner or ventilation openings, and decorations should not touch the glass.

A linear fuel bed in the form of a single container with a width of 524 mm, with double walls and a bottom. The burner has an ethanol level indicator. There is ceramic wool inside the burner, which functions as a sponge - absorbing the liquid to prevent leaks if the bioethanol fireplace falls. The burner is made of stainless steel with a capacity of approximately 0.7 liters. The biofuel will burn in real-time for about 1 hour and 30 minutes when the burner is fully filled. The burner includes flame control and a separate flame extinguishing device.

Dimensions of the bioethanol fireplace:

• Height 450 mm;
• Width 600 mm;
• Depth 250 mm.

Weight of the bioethanol fireplace: 17 kg.

The bioethanol fireplace is manufactured in the EU.

What is a bioethanol fireplace? A decorative bioenergy fireplace that uses liquid bioethanol as fuel. A bioethanol fireplace can be used in any room with effective ventilation. Standard ventilation capacity is sufficient. Bioethanol fireplaces are ideal for living rooms and bedrooms. A bioenergy fireplace does not require a chimney or exhaust fan. It is a safe device. Organic alcohol vapors are burned. Bioethanol fireplaces create a real flame and also give a warm feeling. The heat from a bioethanol fireplace can warm the room. Installation is easy, starting is quick, the fire is clean, no permits are needed, there is no smoke, soot, ash, and no cleaning required. Caution when adding bioethanol to the fireplace: do not pour the liquid outside the bioethanol fireplace. Always follow the instruction manual.