The Mission Air® MA-160 heating mat is designed to be installed beneath ceramic tiles, porcelain tiles or stone, in tile adhesive or self-levelling compound. The self-adhesive mesh is secured to the substrate, while the approximately 3 mm-thick heating cable warms up almost immediately after being switched on. It can be used as the primary heating system or to provide supplementary floor heating, and is connected to a room thermostat to control its operation.
The mat can be cut to fit the shape of the room, but the heating cable must not be cut or shortened. Its single-sided power connection and the option to install it directly in the tile adhesive make it suitable for installations where the floor height cannot be raised significantly.
- Type: Underfloor heating kit
- Heating area: 1.5 m²
- Dimensions: 50 cm × 3 m
- Output per unit area: 160 W/m²
- Total output: 240 W
- Supply voltage: 230 V
- Power connection: Single-sided
- Backing: Self-adhesive fibreglass mesh
- Heating cable thickness: Approx. 3 mm
- Power cable length: 3 m
- Installation: Beneath ceramic tiles, porcelain tiles or stone
- Operation control: Via a room thermostat
Dimensions
- Type
- Underfloor Heating Set
- Compatibility
- Underfloor Heating
- Construction Material [Pharmaceutical]
- -
- Smart / WiFi
- No
Technical Parameters
- Thread / Cross-section
- -
- Power
- -
- Maximum Pressure
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.