The Lemco AX-13525 headend accepts up to 4 independent DVB-S/S2 satellite, DVB-T/T2 terrestrial or DVB-C cable inputs and converts them into 4 adjacent DVB-T/C RF channels. It also supports the distribution of TV and radio programmes over IPTV using UDP/RTP in multicast or unicast mode. Pool technology allows programmes to be selected from any input and assigned to any RF or IP output.
The integrated web server provides local and remote control via LAN. The device is designed to distribute free-to-air TV and radio programmes in cable installations via DVB-T/C or IPTV.
- Type: Headend
- Inputs: 4 × DVB-S/S2/T/T2/C
- DVB-S/S2 input frequencies: 950–2150 MHz
- DVB-T/T2/C input frequencies: 118–900 MHz
- Input connectors: F, female, 75 Ω
- LNB power supply: OFF / 13 V / 18 V
- LNB current: Up to 400 mA
- 22 kHz signal: On / Off, 0.65 V ± 0.35 V, 22 kHz ± 4 Hz
- DiSEqC: 1.0 (Port A, B, C, D)
- DVB-S symbol rate: 1–45 MBaud
- DVB-S roll-off factor: 0.2, 0.25, 0.35
- DVB-S2 symbol rate: 1–55 MBaud (QPSK), 1–45 MBaud (8PSK)
- DVB-S2 modulation: QPSK, 8PSK (automatic)
- DVB-T bandwidth: 6, 7, 8 MHz
- DVB-T2 bandwidth: 5, 6, 7, 8 MHz
- DVB-C input bandwidth: 5, 6, 7, 8 MHz
- DVB-T modulation: QPSK, 16QAM, 64QAM
- DVB-T2 modulation: QPSK, 16QAM, 64QAM, 256QAM
- DVB-C input modulation: 16QAM, 32QAM, 64QAM, 128QAM, 256QAM
- Service selection: User-selected by service name
- Automatic table regeneration: PAT, CAT, SDT, PMTs, EITs
- NIT: Pass-through, custom or automatic
- PCR: Re-stamping
- LCN support: Yes
- RF outputs: 4 × RF on adjacent channels
- Output frequencies: 110–950 MHz, in 1 Hz steps
- Output level: 90 dBµV
- Output connectors: F, female, 75 Ω
- Output attenuation: 0 to -20 dB
- MER: Above 42 dB
- DVB-T output bandwidth: 5, 6, 7, 8 MHz
- DVB-C output bandwidth: 5, 6, 7, 8 MHz
- DVB-C output modulation: 16QAM, 32QAM, 64QAM, 128QAM, 256QAM
- DVB-C output symbol rate: 1–7.2 Ms/s
- IP output: Yes
- IP protocol: UDP/RTP (multicast/unicast)
- IP speed: 1 Gbit
- IGMP support: v2, v3
- IP stream types: MPTS up to 4 TS, SPTS up to 64 TS
- Maximum IP throughput: 480 Mbps
- Management: Integrated web server via Ethernet
- Ethernet speed: 10/100 Mbps
- Ethernet connector: RJ45
- Compatible browsers: Chrome, Firefox, Safari, Opera, Edge
- Device power supply: 2 × +12 VDC
- Maximum power consumption: 1.8 A
- Operating temperature: 0–40 °C
- Storage temperature: -10 to +70 °C
- Humidity: Up to 90%
- Dimensions: 235 × 115 × 48 mm
- Weight: 450 g
- Type
- Central Amplifier
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.