Skroutz.mt

Raider RD-MSA30 Electric Multi-Sander 300W with Speed Control and with Suction System 040410
Sanders

Raider RD-MSA30 Electric Multi-Sander 300W with Speed Control and with Suction System 040410

Technical Specifications:

  • Power: 300W
  • Base Plate: 90x187mm
  • No-load Vibrations: 7000|12000min-1
  • Dust Protection
  • Frequency: 50Hz
  • Adjustable Speed: Yes
  • Weight: 2.25kg
  • Rated Voltage: 230V
  • Power Supply...

Technical Specifications:

  • Power: 300W
  • Base Plate: 90x187mm
  • No-load Vibrations: 7000|12000min-1
  • Dust Protection
  • Frequency: 50Hz
  • Adjustable Speed: Yes
  • Weight: 2.25kg
  • Rated Voltage: 230V
  • Power Supply Type: Corded

Includes:

  • 3 sanding sponges
  • 1 dust collector
  • 6 sandpapers
  • 1 tool case

Description:

The RAIDER RD-MSA30 multi-sander is a 3-in-1 tool, designed for...

See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 2250 gr
  • See all
50 50 €
Delivery by Thu, 02 Jul
14,00 €   shipping cost
Sent from Greece
From Apostologiorgakis
Greece
20 pieces
See Power Tools on the page of Apostologiorgakis
Review the product
Product report

Description

Description

Technical Specifications:

  • Power: 300W
  • Base Plate: 90x187mm
  • No-load Vibrations: 7000|12000min-1
  • Dust Protection
  • Frequency: 50Hz
  • Adjustable Speed: Yes
  • Weight: 2.25kg
  • Rated Voltage: 230V
  • Power Supply Type: Corded

Includes:

  • 3 sanding sponges
  • 1 dust collector
  • 6 sandpapers
  • 1 tool case

Description:

The RAIDER RD-MSA30 multi-sander is a 3-in-1 tool, designed for maximum flexibility and performance in various sanding and polishing tasks. It features a 90x187mm sander for uniform sanding of large surfaces such as wooden boards, doors, and furniture, a random orbital sander Ø125mm for curved and irregular surfaces, and a detail sander for hard-to-reach corners and edges. The tool offers quick and easy disc change and adjustable speed for complete control depending on the material and desired finish.

Key Features:

  • Combines three tools in one, allowing fine or coarse sanding depending on the application.
  • Reduces the risk of overheating or damage to the work surface.
  • Dust protection ensures cleaner and safer operation.
  • Variable speed provides precision and maximum performance on wood, metal, and plastic.
  • Comes with sanding sponges, dust collector, sandpapers, and tool case for easy storage and transport.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Multi-Sander

Type

Multi-Sander
For smoothing all surfaces with alternating sanding bases.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
300 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Net Weight
2250 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
2000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Technical Specifications:

  • Power: 300W
  • Base Plate: 90x187mm
  • No-load Vibrations: 7000|12000min-1
  • Dust Protection
  • Frequency: 50Hz
  • Adjustable Speed: Yes
  • Weight: 2.25kg
  • Rated Voltage: 230V
  • Power Supply Type: Corded

Includes:

  • 3 sanding sponges
  • 1 dust collector
  • 6 sandpapers
  • 1 tool case

Description:

The RAIDER RD-MSA30 multi-sander is a 3-in-1 tool, designed for maximum flexibility and performance in various sanding and polishing tasks. It features a 90x187mm sander for uniform sanding of large surfaces such as wooden boards, doors, and furniture, a random orbital sander Ø125mm for curved and irregular surfaces, and a detail sander for hard-to-reach corners and edges. The tool offers quick and easy disc change and adjustable speed for complete control depending on the material and desired finish.

Key Features:

  • Combines three tools in one, allowing fine or coarse sanding depending on the application.
  • Reduces the risk of overheating or damage to the work surface.
  • Dust protection ensures cleaner and safer operation.
  • Variable speed provides precision and maximum performance on wood, metal, and plastic.
  • Comes with sanding sponges, dust collector, sandpapers, and tool case for easy storage and transport.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Multi-Sander

Type

Multi-Sander
For smoothing all surfaces with alternating sanding bases.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
300 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Net Weight
2250 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
2000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

50,50 €
14,00 €   shipping cost