Fixotile Gel Max tile adhesive is a white, flexible, resin-enhanced cementitious adhesive featuring GEL technology, classified as C2TE S1 according to EN 12004. It is suitable for absorbent and non-absorbent tiles on floors and walls, as well as for rooftops, balconies, swimming pools, industrial areas and surfaces with underfloor heating. GEL technology helps ensure the adhesive fully wets the tile and maintains a stable volume during application.
It offers zero vertical slip, extended open time and a high capacity for elastic deformation. It can be applied at a thickness of up to 20 mm and is suitable for tiles up to 160 × 320 cm. It can be used indoors and outdoors, including over rooftop waterproofing.
- Type: Tile adhesive
- Technology: GEL with water-swellable copolymers
- Classification: C2TE S1 according to EN 12004
- Colour: White
- Quantity: 25 kg
- Suitable tiles: Absorbent and non-absorbent
- Maximum tile size: 160 × 320 cm
- Suitable applications: Floors, walls, rooftops, balconies, swimming pools, industrial areas and underfloor heating
- Use: Indoor and outdoor
- Slip: ≤ 0.5 mm
- Transverse deformation: 2.5–5 mm
- Application thickness: Up to 20 mm
- Mixing ratio: 7.5 L of water per 25 kg
- Open time: At least 30 minutes under normal conditions
- Grouting on walls: After 4–8 hours
- Grouting on floors: After 24 hours
- Consumption: 3–4 kg/m²
- Compatibility: Flexible cementitious waterproofing products and elastomeric waterproofing membranes
- Volatile organic compound emissions: Very low, EMICODE EC1PLUS certified
- Storage: 12 months in the original packaging, in a dry place
- Type
- Tiles
- Quantity
- 25 kg
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.