Skroutz.mt

WorkPro Impact Demolition Hammer Battery Brushless 20V with Chuck SDS Plus WP390306
Rotary Hammers

WorkPro Impact Demolition Hammer Battery Brushless 20V with Chuck SDS Plus WP390306

Key features:

  • Power supply: battery
  • Voltage: 20V
  • Chuck type: SDS Plus
  • Brushless motor
  • Without battery & charger
See full description
  • Item Excavator

  • Impact Energy

    The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

    2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.

    4.5

    For casual amateur use, 2 to 4 Joules are considered sufficient.

  • Socket

    SDS - SDS Plus (TE-C)

    SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.

  • Speed Setting

    1

    Ability to control the rotation speed, either through the trigger or via a speed selector.

  • Maximum Number of Impacts

    The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

    2.

    Note that the Impact Energy is also important for performance, indicating the force of each strike.

  • Volt

    The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

    2. Impact energy is another characteristic that shows the "strength" of the tool.

    20

    Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.
  • See all
Review the product
Product report

Description

Description

Rechargeable Rotary Hammer Drill

The rechargeable rotary hammer drill SDS PLUS 20V-Li BL SOLO WP390306 WORKPRO (PROFI) is a powerful and ergonomic tool for professional use. Equipped with a brushless motor, it offers high performance, longer lifespan, and reduced wear. With an impact energy of 4.5 Joules, an impact rate of 0-3800 bpm, and a no-load speed of 0-800 rpm, it ensures fast and efficient drilling or chiseling results on various materials.

Features

The tool features an SDS PLUS chuck, with a drilling capacity of up to 40 mm in wood, 13 mm in steel, and 26 mm in concrete. The electronic speed control allows for precise adjustment according to the task, making the WP390306 ideal for demanding projects and professional use, offering reliability and ergonomics in every application.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Power Source
Battery
Type
Excavator

Battery Specifications

Number of Batteries
0
Volt
20 V

Volt: 20

The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

2. Impact energy is another characteristic that shows the "strength" of the tool.


Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.
Lithium
Yes

Drilling Features

Steel Ø
13 mm

Steel Ø

The maximum possible drilling diameter in steel.
Wood Ø
40 mm

Wood Ø

The maximum possible drilling diameter in wood.
Cement Ø
26 mm

Cement Ø

The maximum possible drilling diameter in concrete.

Features

Maximum Motor Speed
800 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
4.5 Joule

Impact Energy: 4.5

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
3800 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
Yes

Brushless


It features a brushless motor that generates less heat and friction, resulting in less wear on the motor and longer battery life.
Pneumatic
No
Speed Adjustable
Yes

Speed Adjustable


Ability to control the rotation speed, either through the trigger or via a speed selector.
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Handle included
Yes
Integrated Light
No
Guide
No
Net Weight
-
Weight (with Battery)
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Rechargeable Rotary Hammer Drill

The rechargeable rotary hammer drill SDS PLUS 20V-Li BL SOLO WP390306 WORKPRO (PROFI) is a powerful and ergonomic tool for professional use. Equipped with a brushless motor, it offers high performance, longer lifespan, and reduced wear. With an impact energy of 4.5 Joules, an impact rate of 0-3800 bpm, and a no-load speed of 0-800 rpm, it ensures fast and efficient drilling or chiseling results on various materials.

Features

The tool features an SDS PLUS chuck, with a drilling capacity of up to 40 mm in wood, 13 mm in steel, and 26 mm in concrete. The electronic speed control allows for precise adjustment according to the task, making the WP390306 ideal for demanding projects and professional use, offering reliability and ergonomics in every application.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Power Source
Battery
Type
Excavator

Battery Specifications

Number of Batteries
0
Volt
20 V

Volt: 20

The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

2. Impact energy is another characteristic that shows the "strength" of the tool.


Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.
Lithium
Yes

Drilling Features

Steel Ø
13 mm

Steel Ø

The maximum possible drilling diameter in steel.
Wood Ø
40 mm

Wood Ø

The maximum possible drilling diameter in wood.
Cement Ø
26 mm

Cement Ø

The maximum possible drilling diameter in concrete.

Features

Maximum Motor Speed
800 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
4.5 Joule

Impact Energy: 4.5

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
3800 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
Yes

Brushless


It features a brushless motor that generates less heat and friction, resulting in less wear on the motor and longer battery life.
Pneumatic
No
Speed Adjustable
Yes

Speed Adjustable


Ability to control the rotation speed, either through the trigger or via a speed selector.
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No

Additional Features

Handle included
Yes
Integrated Light
No
Guide
No
Net Weight
-
Weight (with Battery)
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

153,14 €
20,00 €   shipping cost